Power Key - Kenwood KR-200HT Instruction Manual

KR-200HT (En /k)
N.B. circuit
Indicator
TUNED indicator
te BB uy is i ul a dM i o
AUTO tuning/AUTO
indicators ce display.
tnput display,
Preset channel display,
Surround mode display
STEREO
indicator
KENWOGD
+E
DN "BT AMO
44 www) BB & 'gy 3 23
@POWER key
Press to switch the power ON and OFF.
© STANDBY indicator
© SRS 3D indicator
Lights when the SRS 3D system is ON
OQ SPEAKERS indicator
Lights when the speakers are ON.
O STEREO key — 24
Press to turn the surround mode OFF
G@ DOLBY PRO LOGIC key 22,
@ DOLBY 3 STEREO key = 24.
OSRS 3D key ~ 25,
OINPUT SELECTOR knob
Rotate to select the input source.
@ VOLUME CONTROL knob
PHONES jack
Plug headphones into this jack.
@ AUTO key
Press to select the tuning mode from the
auto tuning and manual tuning modes. +47.
Press and hold the AUTO key for more than
2 seconds to switch the VIDEQO1 display to
another input display 12
@ SPEAKERS key
Press to turn the speakers ON and OFF.
@ DIRECT key (48.
Press when tuning a broadcast station by
entering the digits of its frequencies.
@ MEMORY key 149!
Press when registering a broadcast sta-
tion in the preset memory.
© Numeric keys (1 to 0, +10)
@ BAND key ~fz
Press to switch the broadcasting band.
@ DISPLAY key
Press to switch the displayed information
between the surround mode dispiay and
input selector display.
Press and hold the DISPLAY key for more
than 2 seconds to switch the display bright-
ness.
@TUNING keys(v, A) ——in
Press to Select a radio station.
@ TAPE 2 MONITOR key - 16)
Press to monitor the sound being re-
corded, etc.
@N.B. key a.
Press to compensate for the insuffi
ciency in the base sound.
@ SOURCE DIRECT key (74)
Press to listen to the source sound with
a higher sound quality.
About the 5 TA NDBY slicatob