Download Print this page

Fujitsu SM-9066 Product Manual

Usb transceiver

Advertisement

Quick Links

SM-9066 Wireless Mouse /SD-9080 USB Transceiver Product Guide
Getting Started
Thank you for choosing this 2.4G Wireless Mouse Kits. It operates with digital radio technology to ensure no hinder
communication between the mouse and your computer without connecting cable.
The transmission and receiving of mouse are free from angle restriction.
Preparing mouse and Dongle
Before working with your new mouse, look at the "Hardware Installation", and take a few one-time preparations.
Hardware Installation
● Place the dongle at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance.
● The distance between the mouse and dongle should not exceed 10 M.
● Do not place the dongle on metal surfaces.
● Do not move optical mouse on following surface -
Step 1: Connect the USB transceiver
● Plug the dongle connector into an USB port.
● SYSTEM will take around 10 sec to find your keyboard and mouse automatically.
Step 2: Insert batteries
Inserting batteries in mouse
The mouse requires one alkaline AA battery.
● Open the battery compartment cover on the bottom of the mouse.
● First push the battery puller in then insert one AA battery into battery compartment.
● Fix the battery compartment cover on the bottom of mouse again.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Use and replace only with correct size and type
(alkaline or zinc-carbon)of battery.
Working mouse
USB Transceiver and mouse electrical specification
Iin addition to two buttons, the mouse also has a wheel that can be used as follows:
● As a 3rd button: press on the wheel.
● For scrolling, e.g. in documents or on Internet pages: turn the wheel forward or back.
The Transceiver will have one main function: translate radio communications from the mouse to the PC via USB
Full Speed USB Specification Compliance., meets Universal Serial Bus Specification version 2.0.
Support USB Suspend Mode.
Mouse
Mouse
Mouse
USB Transceiver
USB Transceiver
Designation
Modulation
Operating Frequency
channel
Storage temperature
Operating temperature
Battery type mouse
Supply voltage mouse
Current consumption mouse
Supply voltage dongle
Current consumption dongle
Glass or any transparent materials; Mirror or reflecting surface;
Mouse pad with too many colors; Rough surface.
Value
GFSK
2403MHz~2480MHz
78 channel 2.4GHz ISM Band
–20 °C ... +60 °C
0 °C ... +40 °C
One alkaline battery, type AA
1.2~1.65V
max. 50 mA
DC 5.0 V ±5 %
max..100 mA

Advertisement

loading

Summary of Contents for Fujitsu SM-9066

  • Page 1 SM-9066 Wireless Mouse /SD-9080 USB Transceiver Product Guide Getting Started Thank you for choosing this 2.4G Wireless Mouse Kits. It operates with digital radio technology to ensure no hinder communication between the mouse and your computer without connecting cable. The transmission and receiving of mouse are free from angle restriction.
  • Page 2 FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

This manual is also suitable for:

Sd-9080