Test Mode - Pioneer PD-M602 Service Manual

PD-M602
@ Test Point and Adjustment Variable Resistor Positions
MOTHER BOARD ASSEMBLY
VRIS2 -VR151
1301
80.1
Kk»
'40
Figure 1. Adjustment Locations
TEST
w225[]W226
@ Notes
1. Use a 10:1 probe for the oscilloscope.
2. All the knob positions (settings) for the oscilloscope in the adjustment procedures are for when a 10:1 probe is
used.
@ Test Mode
{Setting these models to test mode]
How to set this model into test mode.
1. Unplug the power cord from the AC socket.
2. Short the test mode jumper wires. (See Figure 1.)
3. Plug the power cord back into the AC socket.
28