Starting The Programme; Child Lock - Beko WMC 1471W User Manual

Operating the product
C
Prewash without detergent is
recommended for tulle and curtains.
• Quicker Wash
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme
table.
Delayed Start (In some models only)
With the Delayed Start function the startup of
the programme may be delayed up to 3, 6 or 9
hours.
C
Do not use liquid detergents when you
set Delayed Start! There is the risk of
staining of the clothes.
1. Open the loading door, place the laundry and
put detergent, etc.
2. Select the washing programme,
temperature, spin speed and, if required, the
auxiliary functions.
3. Set the desired time by pressing the Delayed
Start button. When the button is pressed
once, 3 hours delayed start is selected. When
the same button is pressed again, 6 hours
delay is selected, and when it is pressed
for the third time, 9 hours delayed start
is selected. If you press the Delayed Start
button once again, Delayed Start function
will be canceled.
4. Press Start / Pause button. Previous delayed
start time light turns off and next delayed
start time light turns on after every 3 hours.
5. At the end of the countdown, all delayed
start lights will turn off and the selected
programme will start.
26 / EN
C
Additional laundry may be loaded during
the delayed start period.
Changing the Delayed Start period
Press Delayed Start button. Every time the
button is pressed, the period will change in
3-hour increments and the light of the selected
delayed start time will turn on.
Cancelling the Delayed Start function
If you want to cancel the delayed start
countdown and start the programme
immediately:
1. Set the Delayed Start period to zero (all
delayed start period lights will turn off) or
turn the Programme Selection knob to any
programme. Thus, Delayed Start function
will be cancelled. The End/Cancel light
flashes continuously.
2. Then, select the programme you want to run
again.
3. Press Start / Pause button to start the
programme.

5.11 Starting the programme

1. Press Start / Pause button to start the
programme.
2. Programme follow-up light showing the
startup of the programme will turn on.
C
If no programme is started or no key
is pressed within 1 minute during
programme selection process, the
machine will switch to Pause mode and
the illumination level of the temperature,
speed and loading door indicator lights
will decrease. Other indicator lights
and indicators will turn off. Once the
Programme Selection knob is rotated or
any button is pressed, indicator lights
and indicators will turn on again.

5.12 Child Lock

Use child lock function to prevent children from
tampering with the machine. Thus you can
avoid any changes in a running programme.
Washing Machine / User's Manual