Table of Contents
Advertisement
Shooting with Remote Control
o • Shooting with remote control may not be possible if the
remote control sensor on the camera is exposed to
sunlight or strong fluorescent light If this happens, use
the self-timer to take the picture or move the camera to
another location.
♦ The camera's remote control function may not operate
correctly if the camera is close to a fluorescent light
during signal reception. If this happens, move the
camera away from the fluorescent light
• Remote control shots can be taken for the 4 minutes
that
is displayed.
* Set the camera on a steady surface or use a tripod.
Replacing the Remote Control Battery
Replace the battery when you can no longer use the
remote control to take pictures.
Battery: one CR2032 lithium battery
1
Pull out the battery
holder.
• ® Use a pen or other
pointed implement to push
in the release button (D as
you slide the battery holder
out
Load a new battery into
the holder and fit the
holder back into the
remote control.
• Ensure that the + and -
terminals are positioned
correctly.
11-32
Advertisement
Table of Contents
