Product Assembly - KitchenAid 5KHM7210 Owner's Manual

SPEED CONTROL GUIDE (CONTINUED)
SPEED
8
9
NOTE: To mix and knead bread dough, use the Dough Hooks. The Turbo Beaters are not
designed for that purpose.

PRODUCT ASSEMBLY

ATTACHING THE ACCESSORIES
Wash all accessories in warm, soapy water before use. Be sure the Hand Mixer is unplugged
before cleaning, and putting on or taking off parts.
IMPORTANT: Be sure to read and follow the specific instructions in this manual for proper use
of the Hand Mixer.
1.
Unplug the Hand Mixer from the electrical outlet.
NOTE: Paired accessories (Turbo Beaters, Dough Hooks) include one accessory with a
collar, and one without. Single accessories come with a collar (Mixing Rod) or without a
collar (Whisk).
2.
Insert the accessory shaft with the collar into the larger opening of the Hand Mixer. Align
the flanges on the shaft with the slots in the opening. Push to lock into place.
3.
Insert the accessory without a collar into the smaller opening. Align and push to lock into
place.
NOTE: An accessory shaft without a collar may be used in either opening. Those with a
collar may only be used in the larger opening.
ATTACHMENTS WITH MODEL
5KHM7210 (7-Speed)
-
-
WARNING
Injury Hazard
Unplug mixer before touching
beaters.
Failure to do so can result in
broken bones, cuts, or bruises.
5KHM9212 (9-Speed)
16-Wire Whisk, Mixing Rod
16-Wire Whisk, Mixing Rod
5