Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Thermostat
  5. AIRSTAGE Remo Set
  6. Instruction manual

Fujitsu AIRSTAGE Remo Set Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
AIRSTAGE Remo Set
PART No. 9373329954-03

Advertisement

loading

Related Manuals for Fujitsu AIRSTAGE Remo Set

Summary of Contents for Fujitsu AIRSTAGE Remo Set

  • Page 1 INSTRUCTION MANUAL AIRSTAGE Remo Set PART No. 9373329954-03...
  • Page 2 Introduction To CONTENTS What this application can do This application is intended for use by installers and maintenance specialists of air conditioners. Using this application allows you to change the settings of remote controllers and the field settings of indoor units connected to remote controllers. In addition, logo images to be displayed on the remote controllers can be sent.
  • Page 3 Contents To CONTENTS Preparation ..............03 Usage Precautions ............04 Data Setting ..............06 Data Setting Screen ..............06 Menu ................. 07 Environmental setting / Help ..........07 RC Setting ................ 08 RC Setting Screen ..............08 Creating a new setting file .............09 Loading or copying the current setting values .....

  • Page 4: Preparation Before Using

    ® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJITSU GENERAL LIMITED is under license. Other trademarks and trade names are those of their respective owners. NOTE: When this application is updated, a notification is sent from Google Play or App Store.

  • Page 5: Usage Precautions

    Usage Precautions To CONTENTS Usage precautions for this application If a communication problem occurs due to radio wave interference caused by an obstacle or microwave oven, operation contents may not be reflected. Make sure that the operation contents have been reflected.

  • Page 6: About This Manual

    Usage Precautions To CONTENTS ® Precautions on Bluetooth Do not use around wireless LAN and other wireless devices, around equipment such as a microwave that emits radio waves, at places with many obstacles, and in other environments under a poor radio wave condition.

  • Page 7: Data Setting

    Starting up the application Data Setting Data Setting To CONTENTS Data Setting Screen Starting up the application dis- plays the Data Setting screen (a) Tap here to display the menu bar. (→P.07) (b) The setting file being selected is displayed. * Tap here to display the RC Setting screen.
  • Page 8 Menu To CONTENTS Environmental setting / Help Tap (a) to display the menu bar. Menu (b) Tap here to display the Environmental setting screen. (c) Tap here to display this manual. Environmental setting (d) Tap here to return to the Data Setting screen (→P.06) or the Send Data screen (→P.35).
  • Page 9 File creation RC Setting To CONTENTS RC Setting Screen This screen allows you to create and select a setting file to change the remote controller settings collectively such as a temperature unit and language. Tap [RC Setting] on the Data Setting screen (→P.06) to display the RC Setting screen.
  • Page 10 RC Setting To CONTENTS Creating a new setting file Items that can be set are as follows. • Temp. Unit Setting(→P.10) • Language Setting(→P.11) • Time(→P.12) • R.C. Group Name Setting(→P.13) • Display Item Setting(→P.14) • R.C. Sensor Setting(→P.15) • Deadband Setting(→P.16) •...
  • Page 11 RC Setting To CONTENTS Creating a new setting file Temp. Unit Setting The temperature unit displayed on the remote controller can be changed. Tap [°C] or [°F] to change the setting. (The unit with the background coloured in blue is selected.)
  • Page 12 RC Setting To CONTENTS Creating a new setting file Language Setting The language displayed on the remote controller can be changed. Tap [ > ] to display the Language Setting window. Tap the check box to change the language to be set. (The language with a check mark is selected.) Tap [CANCEL] to cancel the...
  • Page 13 RC Setting To CONTENTS Creating a new setting file Time The setting to synchronize the time of smartphone with that of remote controller can be changed. Tap (a) to switch between ON and OFF. Select ON when sending the clock information of the smartphone to the remote controller.
  • Page 14 RC Setting To CONTENTS Creating a new setting file R.C. Group Name Setting The group name of the remote controller displayed on the remote controller can be set. Tap [ > ] to display the R.C. Group Name Setting window. Tap the entry field in the centre to display the keyboard.
  • Page 15 RC Setting To CONTENTS Creating a new setting file Display Item Setting Items to be displayed on the remote controller can be set. Tap [ > ] to display the Display Item Setting window. Tap (a) to switch between ON and OFF.
  • Page 16 RC Setting To CONTENTS Creating a new setting file R.C. Sensor Setting The usage setting for the remote controller sensor can be changed Tap (a) to switch between ON and OFF. Select ON when using the remote controller sensor. Select OFF when not using it.
  • Page 17 RC Setting To CONTENTS Creating a new setting file Deadband Setting The deadband value can be set. Tap [ > ] to display the Deadband Setting window. Tap the number in the centre to display the list of values that can be set.
  • Page 18 RC Setting To CONTENTS Creating a new setting file Service Contact The service contact information can be entered. Tap [ > ] to display the Service Contact window. Tap the entry field to display the keyboard. Enter necessary information. Name: Up to 50 characters Phone: Up to 20 characters Email: Up to 50 characters Tap [CANCEL] to cancel the...
  • Page 19 RC Setting To CONTENTS Creating a new setting file Backlight Setting The backlight settings of remote controller can be changed. Tap [ > ] to display the Backlight Setting window. Tap (a), (c) or (d) to display the list of values that can be set.Tap and select a value.
  • Page 20 RC Setting To CONTENTS Creating a new setting file Summer Time Setting The summer time setting can be changed. Tap (a) to switch between ON and OFF. Selecting ON advances the clock setting of the remote controller one hour. Select OFF if it is not necessary.
  • Page 21 RC Setting To CONTENTS Creating a new setting file Admin Password The Admin password can be entered. Tap [ > ] to display the Admin Password window. Tap the entry field in the centre to display the keyboard. Enter a 4-digit number. Tap [CANCEL] to cancel the setting and close the window.
  • Page 22 RC Setting To CONTENTS Creating a new setting file Installer Password The Installer password can be entered. Tap [ > ] to display the Installer Password window. Tap the entry field in the centre to display the keyboard. Enter a 4-digit number. Tap [CANCEL] to cancel the setting and close the window.
  • Page 23 RC Setting To CONTENTS Creating a new setting file Date Format The date format displayed on the remote controller can be changed. Tap [ > ] to display the Date Format window. Tap the check box and select the date format. (The format being selected is checked.) Tap [CANCEL] to cancel the...
  • Page 24 RC Setting To CONTENTS Creating a new setting file Time Format The time format displayed on the remote controller can be changed. Tap [ > ] to display the Time Format window. Tap the check box and select the time format. (The format being selected is checked.) Tap [CANCEL] to cancel the...
  • Page 25 RC Setting To CONTENTS Creating a new setting file Set Temp. Range The temperature ranges that can be set on the remote controller can be changed. Tap [ > ] to display the Set Temp. Range window. Tap (a) to switch between presence and absence of the set temperature range restriction.
  • Page 26 RC Setting To CONTENTS Loading or copying the current setting values NOTE: To make the following settings, connection between the remote controller and the smartphone is required. (→P.34) When the remote controller is connected, some of the notations on the RC setting Screen (→P.08) are changed.
  • Page 27 RC Setting To CONTENTS Editing the created setting file Tap […] on the RC Setting screen (→P.08) to display the edit bar. Tap here to edit the setting file. For details of the editable contents, refer to “Creating a new setting file”(→P.09).
  • Page 28 Logo Data Logo Data To CONTENTS Logo Data Screen This screen allows you to select a logo image to send to the remote controller, import it from the smartphone, or delete it. Tap [Logo Data] on the Data Setting screen (→P.06) to display the Logo Data screen.
  • Page 29 Logo Data To CONTENTS Importing an image from the smartphone Tap [Add Data] to open the image folder on the smartphone. Tap and select the image to be set. NOTE: Images that do not satisfy the following conditions cannot be imported to the application.
  • Page 30 Logo Data To CONTENTS Deleting the imported image Tap […] to display the Delete menu bar at the bottom of the screen. Tap [Delete] to display the confirmation window. Tap [Cancel] to close the Delete menu bar. Tap [CANCEL] to cancel the deletion and close the confirmation window.

  • Page 31: Function Setting Screen

    Function Setting Function Setting To CONTENTS Function Setting Screen This screen allows you to create and select a setting file to change the Function settings of the air conditioner collectively. NOTE: For the supported Function number and Setting number, refer to the installation manual of the indoor unit.
  • Page 32 Function Setting To CONTENTS Creating a new setting file Tap the entry field (a) for Func No. or entry field (b) for Setting No. to display the keyboard. Enter a 2-digit number for each. NOTE: For the supported Function number and Setting number, refer to the installation manual of the indoor unit.
  • Page 33 Function Setting To CONTENTS Loading or copying the current setting values NOTE: To make the following settings, connection between the remote controller and the smartphone is required. (→P.34) The setting contents in the Function setting may be reflected by turning off the air conditioner.
  • Page 34 Function Setting To CONTENTS Editing the created setting file Tap […] on the Function Setting screen (→P.30) to display the edit bar. Tap here to edit the setting file. For details of the editable contents, refer to “Creating a new setting file”(→P.31).
  • Page 35 File transmission Connect to RC Connect to RC To CONTENTS Connecting the smartphone to the remote controller Tap [Connect to RC] on the Data Setting screen (→P.06) to dis- play the Connect to RC screen. Follow the instructions displayed on the Connect to RC screen, and operate the remote controller and smartphone.
  • Page 36 Send Data Send Data To CONTENTS Send Data Screen When the connection with the remote controller (→P.34) is completed, the Send Data screen is displayed. (a) Tap here to display the menu bar. (→P.07) (b) The remote controller connection status is displayed. Tap here to release the connection with the remote controller.
  • Page 37 Send Data To CONTENTS Send to RC This button allows RC Setting, Logo Data and Function Setting to be sent to the connected remote controller. Tap [Send to RC] on the Send Data screen (→P.35) to dis- play the sending-in-progress screen.
  • Page 38 Disconnect from RC To CONTENTS This describes how to release the connection with the remote controller. Tap [Connected RC Name] on Send Data screen (→P.35), or tap [Next Connect] on the send- ing-completion screen (→P.36) to display the remote controlle disconnection window.

  • Page 39: Troubleshooting

    Troubleshooting To CONTENTS Connection with the remote controller fails The remote controller is not displayed z Check the distance between the remote controller and the smartphone. If the distance is 10 m or more, the connection fails. ® z Make sure that the Bluetooth communication is enabled on your smartphone.
  • Page 40 Troubleshooting To CONTENTS Field settings are not overwritten z Check if the air conditioner supports the field settings that have been made. For supported field settings, refer to the in- stallation manual of the air conditioner. Setting files or logo images cannot be newly created z Check the number of saved files or images.