Maintenance - Husqvarna Fleet Services Operator's Manual

LED
LED flashes 1 time each 5 seconds.
LED flashes 2 times each 5 seconds.
LED flashes 1 time each second.
LED flashes regularly. The amount of
flashes from the LED changes with the
speed of the engine.
LED is on for 1 second, then it goes off
and comes on again.
LED is on for 1 second, then it goes off
for 5 seconds and comes on again.
Operation of the product
• The Husqvarna Fleet Services
connects to the Husqvarna Fleet Services
the Husqvarna Fleet Gateway app automatically.
The Husqvarna Fleet Services
connects to the app with Bluetooth
technology.
• The Husqvarna Fleet Services
collects data from the Husqvarna Fleet Services
Machine Sensor.
To replace the battery
WARNING:
battery safety before you install the battery.
Battery safety on page 4 .
Refer to
2132 - 001 - 19.10.2023
Operation
The Husqvarna Fleet Services
loaded all available data.
The Husqvarna Fleet Services
data.
The sensor has found an electromagnetic field from a battery operated
product or electric component.
The sensor senses the speed of the petrol operated product.
Firmware updates.
The sensor has found the engine/motor of the product and the configura-
tion is set.
™
Machine Sensor
™
app or
™
Machine Sensor
®
wireless
™
app automatically
™

Maintenance

Read and understand the
™
Machine Sensor is enabled and has up-
™
Machine Sensor is enabled and uploads
• The data update shows in the Husqvarna Fleet
™
Services app approximately 15 minutes after the
product is set to off.
• The Husqvarna Fleet Services
can save data for maximum 3 weeks of operation
time.
• Husqvarna recommends to upload the data
minimum 1 time each week for products that are in
operation regularly.
1. Remove the sensor top cover from the sensor
bottom cover counterclockwise with the maintenance
tool.
™
Machine Sensor
7