Burner; Electrodes - GE JGP328 Owner's Manual

GEPpp/iances.com
t
Burner cap properly seated
Burner cap not properly seated
Burner Head and Cap Replacement
Replace file burner head onto die
burner base, maldng sure dlat die head is
properly oriented over tile burner base
and tlle elecux_de. Make sure to place tile
correct burner head on tile correct
burner base and that tile burner head sits
level on the burner base. The burner
beads are not interchangeable.
Replace die burner cap onto die burner
bead, making sure to place tile correct
burner cap on tile correct burner bead.
The burner caps are not inmrchangeable.
Also, make sure that tile burner caps are
properly seated on tile burner beads°
JGP940 and JGP970 (aft burners)
JGP933 and JGP963
(right front burner only)
Burner cap
Locator
pins
Burner h ead
indentations
Make sure the pins in the burner heads match
the burner base indentations and that they are
properly seated in them by rotating the heads
until they are level
JGP328,JGP330,JGP628,JGP630,
JGP933,JGP945,JGP963,JGP975
Electrode
Burner base
Make sure the slot in the burner head is positioned
over the electrode, The burner cap has three
to four pins. When replacing the cap, make sure
none of the pins sits in the stability chamber,
JGP945and JGP975
(right front burner only)
Burner c ap
Burnerhead(
assembly
Orifice
Burner
Electrode base
Make sure the hole in the burner head assembly
is positioned over the electrode and that the burner
head is fully inserted inside the burner base, A
smafl gap between the base and head is normal,
(Onsome models)
"OUTSIDE . ... INSIDE .... OUTSIDE"
edge edges edge
(Onsome models)
Burner Grates
Your cool<top has professional style
grates. These grates are designed for
specific positions. These grams should
only be used in dleir proper positions;
they should not be interchanged° For
your convenience, the undersides of
tile leR and right g,_ams are marked
"OUTSIDE" and "INSIDE". Make sure
dlat tlle sides marked "OUTSIDE" are
f_ming tile oumr edge of tile cooktop and
tile sides marked "INSIDE" are
f_ming each other All grates
shoukt touch once tile), are
filly _kssembled on tile
cool<top smfi_ce.
For cool<tops widl dlree g_ates,
make sure dlat die robs on
either side of tile cenmr gram
fit into tile slots locamd on tile
"INSIDE" edge of tile side
grams.
iJf_ die burner gqams out only when
cool. Grates should be washed regularly
and, of comse, after spillovers. Wash
them in tlle dishwasher or in hot, soapy
water and rinse with clean water When
replacing the grams, be sure they are
positioned
securely over tile burners.
Aldlough tile?, are dinable, the grates will
gqaduaUy lose their shine, regardless of
tile best care you can give diem. This is
due to their continual exposure to high
mmperamres. You will notice this sooner
with lighter color grates.
Do not operate a burner for an extended
period of time without cool<ware on tile
gqam. Tile finish on tile gqam may chip
without cool<ware to absorb tile beat.
/VOTE: D onotcleanthegratesin a
self-cleaning oven.
11