Control The Wifi Radios - NETGEAR RAX40 User Manual

WPA2-Personal [AES] and limits the speed of WiFi devices to 54 Mbps. To use
WPA + WPA2 security, in the Password (Network Key) field, enter a phrase of
8 to 63 characters. To join the 2.4 GHz or 5 GHz guest WiFi network, a user must
enter this password.
• WPA3-Personal. This type of security enables WiFi devices that support WPA3
to join the guest WiFi network. WPA3 is the latest security standard, uses SAE
encryption, and is more secure than WPA2. If all devices on your guest WiFi
network support WPA3, we recommend that you use this type of security. To use
WPA3 security, in the Password (Network Key) field, enter a phrase of 8 to 64
characters. To join the 2.4 GHz or 5 GHz guest WiFi network, a user must enter
this password.
• WPA2-Personal [AES] + WPA3-Personal. This type of security enables WiFi
devices that support either WPA2 or WPA3 to join the router's guest WiFi network.
However, WPA2-Personal [AES] is less secure than WPA3-Personal. If your guest
WiFi network includes devices that support WPA2-Personal [AES] but might not
support WPA3, select WPA2-Personal [AES] + WPA3-Personal. To use WPA2 +
WPA3 security, in the Password (Network Key) field, enter a phrase of 8 to 64
characters. To join the 2.4 GHz or 5 GHz guest WiFi network, a user must enter
this password.
7. Click the Apply button.
Your settings are saved.
8. Make sure that you can reconnect over WiFi to the network with its new security
settings.
If you cannot connect over WiFi, check the following:
• If your computer or mobile device is already connected to another WiFi network
in your area, disconnect it from that WiFi network and connect it to the WiFi
network that the router provides.
Some WiFi devices automatically connect to the first open network without WiFi
security that they discover.
• Does your computer or mobile device display as an attached device?
If it does, it is connected to the network.
• Are you using the correct network name (SSID) and password?

Control the WiFi radios

The router's internal WiFi radios broadcast signals in the 2.4 GHz and 5 GHz ranges. By
default, they are on so that you can connect over WiFi to the router. When the WiFi
radios are off, you can still use an Ethernet cable for a LAN connection to the router.
Manage Network Settings
Nighthawk AX4 4-Stream AX3000 WiFi Router
67 User Manual