Parameter Settings; Performance Value; Error Code - Mitsubishi Electric MELSEC iQ-F Series Manual

Parameter settings

No parameter setting is required for this FB.

Performance value

Module
FX5UJ CPU module
FX5U CPU module, FX5UC CPU module
*1 When the program capacity is set to 128K steps, the processing speed may be reduced.
*2 The labels in the standard area are used.

Error code

Error code Description
104H The setting of i_uAngle (Angle) is out of the range. The angle is
not within the range of 1 to 3599.
105H The setting of i_udResolution (Resolution) is out of the range.
The resolution is not within the range of 10 to 32768.
106H The setting of i_uZeroValue (Zero degree setting value) is out of
the range. The zero degree setting value is not within the range of
0 to (i_udResolution - 1).
2 HIGH-SPEED COUNTER MODULE FB
36
2.6 M+FX5-2HC_DegreeToCountVal (Angle Conversion)
Processing time
0.025ms
*1*2
0.029ms
Maximum scan time
0.532ms
0.451ms
Action
Execute the FB again after checking the setting.
Execute the FB again after checking the setting.
Execute the FB again after checking the setting.
Number of scans
1 scan
1 scan