Rehingeing The Door - AEG LAVATHERM 3200 Operating Instructions Manual

Rehingeing the door
H BA
2/159^
If the door as hinged on the right fails to meet local conditions, the
door can be rehinged on the left.
Pull out the mains plug!
Procedure:
1. Unscrew screws "A" inside the door.
2. Remove the door by sliding horizontally.
3. Unscrew screws "A" on hinge lugs "B".
4. Remove hinge lugs.
5. Press out plastic parts "F" by pressing with a screwdriver and
refit on the opposite side.
6. Press out plastic parts "C" by pressing with a screwdriver.
7. Remove plastic parts "C" and refit on the RH side of the dryer.
8. Unscrew door lock "G". Prise out plastic part "H" using a
screwdriver and refit on the opposite side. Remount door lock
"G" on the RH side.
9. Fit and screw on hinge lugs "B" on the LH side of the dryer.
10. Remove screw of door lock "D" inside the door and remove
door lock.
11. Press out plastic part "E" by pressing with a screwdriver and re¬
fit on the opposite side of the door.
12. Fit and screw back on door lock "D" inside the door on the
left.
13. Remount door on hinge lugs.
Hint on access protection
: The appliance is safe to operate again
only when all plastic parts are fitted.
43