Press and hold the PAIR button at the side of Camera, you will hear a voice prompt
"Ready for Pairing" then tap Continue (fig. A9)
Tap Generate QR code on your device and hold the QR code 15 to 30 cm in front of
Camera to get scanned till you will hear confirmation message " Scanning Sucess"
from your device.(fig. A10)
• It will take a few minutes for the Camera to connect to the
Wi-Fi® network before showing the connection status (fig. A11).
• The Camera has been successfully connected, name your Camera (fig. A12).
Wi-Fi® Internet Viewing
A9
A11
A10
A12
23