Table of Contents
Advertisement
MAINTENANCE
Pour the fluid carefully.
If the fluid level is at or below the MIN
mark, have a dealer inspect for leaks or
worn brake pads as soon as possible.
Brake fluid marked DOT 5 is not compatible
with your vehicle's braking system and can
cause extensive damage.
Changing Wiper Blades
If the wiper blades leave streaks across the windshield, try cleaning them first
with a paper towel or soft cloth and wiper fluid. If the wiper blade rubber has
deteriorated, you should change the wiper blades.
1. Set the power mode to VEHICLE OFF(LOCK).
2. While holding the wiper switch in the
MIST position, press the POWER button
three times. Both wiper arms are now
set to the maintenance position.
3. Lift the driver side wiper arm first, then
the passenger side.
140 |
4. Press and hold the tab, then slide the
holder off the wiper arm.
5. Pull the end of the wiper blade in the
direction of the arrow in the image until
it unfastens from the holder's end cap.
Pull the wiper blade to the opposite
direction to slide it out from its holder.
6. Insert the flat side of the new wiper
blade onto the bottom part of the holder.
Insert the blade all the way.
7. Install the end of the wiper blade into
the end cap.
8. Slide the wiper holder onto the wiper
arm securely.
9. Lower the passenger side wiper arm
first, then the driver side.
10. Set the power mode to ON and hold the wiper switch in the MIST positions
until both wiper arms return to the standard position.
Avoid dropping the wiper arm, as it may damage the windshield.
Tire Information
To safely operate your vehicle, your tires must be of the proper type and size, in
good condition with adequate tread, and properly inflated.
Inflation Guidelines
n
• Properly inflated tires provide the best combination of handling, tread life,
and comfort. Refer to the driver's doorjamb label or the specifications see
SPECIFICATIONS for the specified pressure.
MAINTENANCE
| 141
Advertisement
Table of Contents
