Advertisement
PAGE NUMBER
•
Each page has a number, located on the center
lower part of the page, and each number contains
the following information:
Example : T 1-3-5
SAFETY ALERT SYMBOL AND HEADLINE
NOTATIONS
In this manual, the following safety alert symbol and
signal words are used to alert the reader to the
potential for personal injury of machine damage.
This is the safety alert symbol. When you see this
symbol, be alert to the potential for personal injury.
Never fail to follow the safety instructions prescribed
along with the safety alert symbol.
The safety alert symbol is also used to draw attention
to component/part weights.
To avoid injury and damage, be sure to use appropri-
ate lifting techniques and equipment when lifting
heavy parts.
INTRODUCTION
Consecutive Page Number for Each Group
Group Number
Section Number
T: Technical Manual
W: Workshop Manual
•
CAUTION:
Indicated potentially hazardous situation which
could, if not avoided, result in personal injury or
death.
•
IMPORTANT:
Indicates a situation which, if not conformed to the
instructions, could result in damage to the machine.
•
NOTE:
Indicates supplementary technical information or
know-how.
IN-02
Advertisement
