System Log - D-Link DSL-2741B User Manual

Section 3 – Configuration
The system log displays chronological event log data. The event log can be read from local host or sent to a System Log server. The available event
severity levels are: Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debugging.
To access the SYSTEM LOG setting window, click on the System Log button under the MAINTENANCE tab.
REMOTE LOG SETTING
Click on the Log Enable check-box and select
Log/Display Level from the drop- down menu.
Select display mode from the Mode drop-down
menu; enter the Server IP Address and Server
UDP Port number if Both/Remote Mode is
selected.
Log Level: All events above or equal to the
selected level will be logged.
Display All logged events above or equal
Level: to the selected level will be
displayed.
Mode: Display mode of system log.
Local: Display on local host only.
Remote: Send log file to remote
system log server only
Server IP IP address of the remote system
Address: log server
Server UDP UDP port number of the remote
Port: system log server
D-Link DSL-2741B User Manual

SYSTEM LOG

69