Table of Contents
Advertisement
Notes
Make sure that food is not left in the cooking
■
compartment for too long as it may spoil.
Do not adjust the end time once the appliance is
■
already in operation. Otherwise the cooking result
may no longer be satisfactory.
The end of the cooking time can be delayed by up to
23 hours and 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Set the type of heating and temperature or setting.
1.
Touch the
button twice and use the
v
2.
to set the cooking time.
Touch the
button again.
v
3.
The end time
will be highlighted on the display.
y
Use the
or
button to delay the end time.
@
A
4.
The appliance will apply the settings after a few
seconds. The end time will be shown on the display.
Once the appliance starts, the time will begin counting
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
or
A
@
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
or
A
@
button to
@
button to change the end time.
To cancel, use the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
Setting the timer
You can use the timer whether or not the appliance
itself is in use. However, it is not possible to set a
cooking time or end time.
The maximum time that can be set is 23 hours and 59
minutes. Up to 10 minutes, the timer duration can be
set in 30-second increments. Above 10 minutes, the
button
time increments become longer the higher the value.
The timer duration will start at a different default value,
depending on which button you touch first:
5 minutes if you touch the
you touch the
Touch the
1.
highlighted.
Use the
2.
After a few seconds, the timer duration will start to
count down.
If the set timer duration is the duration for which
Tip:
you wish to cook your food, use the cooking time. The
appliance will then switch off automatically when it has
finished cooking.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
all the way to zero. The timer is now switched off.
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the time flashes, and use the
v
button to change the time.
@
Time-setting options
button to set the end time all the
A
A
button and 10 minutes if
button.
@
button until the timer symbol
v
or
button to set the timer duration.
A
@
or
button to change the timer
A
@
button to reset the timer duration
A
A
or
@
button to set the time.
v
button.
en
is
Q
or
A
13
Advertisement
Table of Contents
