Table of Contents
Advertisement
Pin ③ should face up
Axis ④ should be inserted in holes ⑤ on the hood body
Repeat above steps to install the other half v-flap ②
Warning: Electrical connections must be carried out by a specialized technician, this appliance
must be connected with earth wire. Supply cord must be disconnected from power
source before connection (to the appliance).
If you have an air outlet connect to the outside of your home, your cooker hood can be connected with
an extraction duct (enamel, aluminum, flexible pipe or non-flammable material with an interior diameter
of 150mm), as shown in below picture.
1. Before installation, turn off the unit and unplug it from the outlet.
2. Mark a line "A" as shown in FIG 4, the distance between the bottom of the hood to the top of
cooktop is 650-750mm.
Mounting Method
7
Advertisement
Table of Contents
