Black & Decker BCED26 Instruction Manual page 14

SET UP & USE
TIME SETTING
OFF: When the 'TIMER' is in the 'OFF/0' position, power is not supplied to the
unit. Turning the dial clockwise to the desired program will start the dryer.
COOL : This setting is generally used to cool items that have just been dried to
help prevent creasing.
• ANTI-WRINKLE: For laundry loads that are difficult to iron (e.g. cotton shirts
and linen), set the 'TIMER' between 30-60 minutes, depending on the load size.
Once the cycle stops, the items will still contain moisture, thereby making the
ironing process easier.
• WARM : This setting is used to dry and cool, and depending on the material,
leave items wrinkle free. Set the 'TIMER' by turning the dial clockwise between
60-150 minutes.
• HOT : This setting is used for drying large quantities or bulky items (i.e.
the dryer drum is approximately 1/2 full). Set the 'TIMER' by turning the dial
clockwise to 150+ minutes.
• AIR DRY : This setting is used without any heat to freshen items by letting cool
air move through it (e.g. clothes that have been stored for an extended period
of time).
NOTE: ALWAYS make sure items being dried have gone through the Spin cycle
in the washing machine first. Do not put soaking wet clothes in the dryer.
DRYING TIME REFERENCE
NOTE: Drying times will usually vary between 30 minutes for smaller loads and
200 minutes for larger loads according to load size, type of fabric, degree
of wetness etc.
If clothes are still damp after completing the selected dry cycle, add more drying
time or a higher heat setting for future loads.
NOTE: This is a 120 volt dryer. Drying times will be longer than a 220 volt dryer.
Page 14