Electrical Requirements; Speed Control Guide - KitchenAid 5KPM5 Owner's Manual

PRODUCT SAFETY (CONTINUED)
19. This appliance is intended to be used in household and similar
applications such as:
staff kitchen areas in shops, offices and other working
-
environments;
farmhouses;
-
by clients in hotels, motels and other residential type
-
environments;
bed and breakfast type environments.
-
SAVE THESE INSTRUCTIONS
For complete details on product information, instructions and videos, including Guarantee
information, visit www.KitchenAid.co.uk or www.KitchenAid.eu. This may save you the cost
of a service call. To receive a free printed copy of the information online,

ELECTRICAL REQUIREMENTS

WARNING
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions
can result in death, fire, or electrical
shock.

SPEED CONTROL GUIDE

All speeds have a feature that automatically starts the Stand Mixer at a lower speed to help
avoid ingredient splash-out and "flour puff" at start-up, then quickly increases to the selected
speed for optimal performance.
NOTE: This feature is available only for 5KSM7580X and 5KSM7591X.
4
call 00 800 381 040 26.
Voltage: 220-240 A.C.
Frequency: 50-60 Hz
Wattage:
315 W for model 5KPM5
500 W for models 5KSM7580X, 5KSM7591X
NOTE: The power rating for your Stand Mixer
is printed on the trim brand or on the serial
plate.
Do not use an extension cord. If the power
supply cord is too short, have a qualified
electrician or service technician install an
outlet near the appliance.
The wattage rating is determined by using the
attachment that draws the greatest load
(power). Other recommended attachments
may draw significantly less power.