Electronic Speed Control - Black & Decker BXMX500E Instructions For Use Manual

• Hold the appliance by hand while pressing the motor body
anchoring button to remove it (E).
• Insert the accessory (I, J) you want to use into the
provided hole in the motor body until it clicks in place.
• Place the motor body in the bowl stand and press down
until the button returned to is original position (E).
• Press the unlock appliance arm button (F) to returns to
initial position.
• Connect the appliance to the mains.
• Turn the appliance on, by using the speed selector
control.
• To avoid a fierce, start up of the fan, it is advisable to start
off from the lowest speed position and, once the fan has
been switched on, progressively increase the speed to
the desired position.
• Work with the food you want to process. You can use
the scraper (K) to stir the mixture while the appliance is
working.

ELECTRONIC SPEED CONTROL

• The speed of the appliance can be regulated by using the
speed selector control (B). This function is very useful, as
it makes it possible to adapt the speed of the appliance to
the type of work that needs to be done.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
(BXMX500E MODEL)
• Stop the appliance, selecting position 0 on the speed
selector control.
• Unplug the appliance from the mains.
• Press the button (A) to remove beater or dough hooks.
• Clean the appliance.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
(BXMXA500E MODEL)
• Stop the appliance, selecting position 0 on the speed
selector control.
• Unplug the appliance from the mains.
• Press the button (F) and lift the motor body.
• Remove the bowl (G) from the bowl stand (H).
• Press the button (E) to remove motor body.
• Press the button (A) to remove beater or dough hooks.
• Clean the appliance.
ACCESSORIES
BEATER ACCESSORY (I)
• This accessory is used to whip cream, beat eggs, batters,
fatless sponges, meringues, cheesecakes, mousses, and
soufflés.
• Insert the beater into the orifices in the body of the motor
pressing them in until you hear a click. (Fig. 1A). The
beater can be placed in either of the two orifices, as they
are identical.
• Put the food into the rotatory bowl (G) or into a large
receptacle and switch the appliance on. For best results
with BXMX500E model, turn the whisk clockwise.
• Using speed selector control (B), from minimum speed,
increase gradually to maximum speed.
• Remove the blending accessory pressing the eject button
(A).
DOUGH HOOK ACCESSORY (J)
• This accessory is used for knead bread, pizza dough, etc.
• Insert the dough hooks into the orifices in the body of the
motor pressing them in until you hear a click. (Fig. 1B).
The dough hooks are not the same. Place the dough
hook with the washer in the large orifice. They cannot be
fitted inversely.
• Put the food into the rotating bowl (G) or into a large
receptacle and switch the appliance on. For best results
with BXMX500E model, turn the whisk clockwise.
• Using speed selector control (B), from minimum speed,
increase gradually to maximum speed.
• Remove the dough hook accessory by pressing the eject
button (A).
TURBO FUNCTION (C)
• This allows you to work using pulses and helps to control
the result of the preparation.
• Press the turbo button (C). Keep the button pressed down
to achieve the desired result.
CLEANING
• Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
• Clean the equipment with a damp cloth with a few drops
of washing-up liquid and then dry.
• Do not use solvents, or products with an acid or base pH
such as bleach, or abrasive products, for cleaning the
appliance.
• Do not let water or any other liquid get into the air vents to
avoid damage to the inner parts of the appliance.
5