Brushing Modes - Philips sonicare DiamondClean HX9312 Manual

10
English

Brushing modes

1 To toggle through modes press the on/off button twice in less than
5 seconds.
2 To turn off your Philips Sonicare press the on/off button again
after 5 seconds.
Your Philips Sonicare comes with the Clean mode activated.
Note: When the Philips Sonicare is used in clinical studies, it must be
used in the default 2-minute Clean mode or in the Deep Clean mode
with Easy Start turned off.
Clean mode
The ultimate in plaque removal (default mode). Clean mode lasts for
2 minutes and includes four 30 second Quadpacer intervals.
White mode
2 minutes to remove surface stains and 30 seconds to brighten and
polish your front teeth.
Polish mode
Quick 1-minute mode to brighten and polish your front teeth.
Gum Care mode
Complete whole mouth cleaning (2 minutes) plus gentle cleaning for
problem areas and along the gumline (1 minute).
Sensitive mode
Extra gentle 2 minute mode for sensitive teeth and gums.
Getting used to your Philips Sonicare
Easy-start
The Easy-start feature gently increases the power over the first
14 brushings to help you get used to the brushing with the Philips
Sonicare. The Easy-start feature only works in Clean and White
modes. This Philips Sonicare model comes with the Easy-start feature
activated.
35_021_4218_1_DFU-Booklet_A6_v7.indd 10 29/11/17 10:48