Table of Contents
Advertisement
Chapter 2 Preparations
6.
Fit the terminal of riser card to the slot on the mother board and insert the terminal firmly into the slot. Then
fix the riser card. Next, raise the screw handle at the top of cage and turn the handle to the right 180 degrees
to fix the cage. Then put down the screw handle as before.
7.
Confirm if the cable is properly connected by checking the label, and connect the SAS Expander Card cable
to the controller.
・Connecting the PCI board (Type-a) exclusively for the RAID controller and the SAS expander
Express5800/R120h-2M (3rd-Gen) User's Guide
1. Installing Internal Optional Devices
119
Advertisement
Table of Contents
