Craftsman 247.77011 Operator's Manual
Craftsman 247.77011 Operator's Manual

Craftsman 247.77011 Operator's Manual

4.5 horse power yard vacuum
Table of Contents

Advertisement

Available languages

Available languages

Operator's Manual
4.5 Horse Power
YARD VACUUM
Model No. 247.770110
CAUTION: Before using
this product, read this
manual and follow all
Safety Rules and
Operating Instructions.
Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A.
Visit our Sears website: www.sears.com/craftsman
Printed in U.S.A.
Safety
ES
Assembly
Operation
Maintenance
Parts
Español
FORM NO. 770-10233J
(9/04)

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for Craftsman 247.77011

  • Page 1 Model No. 247.770110 CAUTION: Before using this product, read this manual and follow all Safety Rules and Operating Instructions. Sears, Roebuck and Co., Hoffman Estates, IL 60179, U.S.A. Visit our Sears website: www.sears.com/craftsman Printed in U.S.A. • Safety • Assembly •...
  • Page 2: Table Of Contents

    Limited Warranty on Craftsman Yard Vacuum For one (1) year from the date of purchase, if this Craftsman Equipment is maintained, lubricated, and tuned up according to the instructions to the operator’s manual, Sears will repair or replace free of charge any parts found to be defective in material or workmanship.
  • Page 3: Safety

    WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
  • Page 4 Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.) To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil fuel spillage and remove any fuel soaked debris.
  • Page 5: Assembly

    ASSEMBLY NOTE: Reference to right and left hand side of the Yard Vacuum is observed from the operating position. See Figure 1. This Yard Vacuum has been completely assembled at the factory, except for the handle, bag, and blower chute.
  • Page 6 • Secure the two handles by tightening the upper wing nuts (carriage bolts must be seated properly into the handle). • Remove the hairpin clips from the handle brackets and remove the carriage bolts and wing nuts from the lower handle. See Figure 3. •...
  • Page 7: Operation

    Bag Handle Used to grasp bag in order to assist in attaching, removing, and emptying bag. Craftsman Yard Vacuums conform to the safety standard of the American National Standards Institute (ANSI). OPERATION Bag Handle Figure 6...
  • Page 8 • Remove oil fill dipstick. • With the Yard Vacuum on level ground, use a funnel to fill engine with oil to FULL mark on dipstick. Capacity is approximately 20 oz. Be careful not to overfill. Overfilling will cause the engine to smoke profusely and will result in poor engine performance.
  • Page 9 9. If engine falters, move control lever to CHOKE position, then back to START/RUN position. 10. ALWAYS keep the throttle control in the START/ RUN position when operating the Yard Vacuum. TO STOP ENGINE • Move throttle control lever to STOP or OFF position.
  • Page 10: Maintenance

    • Always observe safety rules when performing any maintenance. • The warranty on this Yard Vacuum does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain the equipment as instructed in this manual.
  • Page 11 TO DRAIN OIL Drain oil while engine is warm. Follow the instructions given below. • Drain the gas tank, start the engine and let it run until the fuel line and carburetor are empty. • Remove oil fill dipstick. • Tip unit on its side to drain through the oil fill tube.
  • Page 12: Service And Adjustments

    Do not attempt to increase the engine RPM. If you think that the engine is running too fast or too slow, take your Yard Vacuum to the nearest Sears Service Center for repair and adjust- ment.
  • Page 13 SHARPENING OR REPLACING CHIPPER BLADE Because the engine on this unit has a tapered crankshaft, a special impeller removal tool (part number 753-0900) is required to remove the impeller assembly. For further assistance, contact your Sears Service Center. NOTE: When tipping the unit, empty the fuel tank and keep engine spark plug side up.
  • Page 14: Storage

    Prepare your Craftsman Yard Vacuum for storage at the end of the season or if the unit will not be used for 30 days or longer. A yearly check-up by your local Sears Service Center is a good way to ensure that the unit runs properly next season.
  • Page 15: Troubleshooting

    Problem Possible Cause(s) Engine fails to start 1. Fuel tank empty or stale fuel. 2. Spark plug wire disconnected. 3. Cannot pull recoil cord. 4. Choke not in ON position. 5. Blocked fuel line. 6. Engine not primed properly. 7. Faulty spark plug. 8.
  • Page 16: Parts List

    Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110 To Engine PARTS LIST Ground To Mounting Bracket...
  • Page 17 Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110 Ref. NOTE: For painted parts, please refer to the list of color codes below. Please add the applicable color code, wherever needed, to the part number to order a replacement part. For instance, if a part, numbered 700-xxxx, is painted polo green, the part num- ber to order would be 700-xxxx-0689.
  • Page 18 Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110...
  • Page 19 Sears Craftsman 4.5 H.P. Yard Vacuum Model 247.770110 Ref. NOTE: For painted parts, please refer to the list of color codes below. Please add the applicable color code, wherever needed, to the part number to order a replacement part. For instance, if a part, numbered 700-xxxx, is painted polo green, the part num- ber to order would be 700-xxxx-0689.
  • Page 20 Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 245A 370R 110A 151A 279A 370K 370A...
  • Page 21 Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 Ref. Part No. Part Description 37266 Cylinder 26727 Dowel Pin 33734 Breather Element 37247 Breather Assy. 12A. 36558 Breather Cover & Tube 28277 Washer 30589 Governor Rod...
  • Page 22 Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110...
  • Page 23 Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 Ref. Part No. Part Description 631615 Throttle Shaft & Lever Assembly 631767 Throttle Return Spring 640278 Carburetor 631184 Dust Seal Washer 631183 Dust Seal 640070 Throttle Shutter...
  • Page 24 Sears Craftsman 4.5 H.P. Engine Model No. 143.004500 For Yard Vacuum Model 247.770110 Ref. Part No. Part Description 590737 Rewind Starter 590740 Retainer 590616 Starter Dog 590617 Dog Spring 590618A Pulley & Rewind Spring Assy. 590687A Starter Housing Assy. 590535...
  • Page 25: Español

    Por un período de un año a partir de la fecha de compra, Sears reparará gratis cualquier defecto en el material o fabricación de esta aspiradora para jardines Craftsman, siempre y cuando haya sido mantenida, lubricada y afinada de acuerdo a las instrucciones de manejo y mantenimiento dadas en el manual del operador.
  • Page 26: Seguridad

    ADVERTENCIA: se siguen, podrían poner en peligro la seguridad personal y/o causar daños físicos. Antes de intentar manejar esta aspiradora para jardines, se debe leer y seguir todas las instrucciones que aparecen en este manual. Si no se cumplen estas instrucciones se corre el riesgo de sufrir lesiones. Cuando en el manual aparece este símbolo, respetar su advertencia.
  • Page 27 piedras, pedazos de vidrio o de metal) y sean lanzados por la boca de descarga. Al elevar la boquilla a la posición más alta también incrementa la admisión de aire para lograr mejor funcionamiento del soplador. • No intentar nunca retirar o vaciar el recolector mientras el motor está...
  • Page 28: Montaje

    Tubo de soplado Guía de la cuerda Tuerca de mariposa Botella de 20 oz. aceite para motor Tuercas de mariposa Manillar inferior Tuercas de mariposa Tornillo de carruaje Figura 1 Esta máquina salió de fábrica sin IMPORTANT: gasolina y sin aceite en el motor. Después de armarla, ver la sección OPERACION en este manual para informarse sobre el llenado de aceite del motor y el tipo de combustible.
  • Page 29 • Retirar las chavetas de las escuadras del manillar y los tornillos de carruaje (cabeza de hongo y cuello cuadrado) y tuercas de mariposa del manillar inferior. Ver la figura 3. • Colocar el manillar inferior sobre los pasadores en las escuadras y fijarlos con las chavetas, tornillos de carruaje y tuercas de mariposa.
  • Page 30: Operación

    Se usa para agarrar el recolector y poderlo instalar, retirar y vaciar. De conformidad con las normas de seguridad de ANSI NOTE: NOTE: Las máquinas aspiradoras para jardines Craftsman cumplen con las normas de seguridad del Instituto de Normalización Nacional de EE.UU. (ANSI). OPERACION Palanca de estrangulador/...
  • Page 31 LLENADO DE GASOLINA Y ACEITE Aceite (una botella de 20 onzas enviada con la máquina) Usar únicamente aceite detergente de buena calidad clasificado con la clasificación de servicio SF, SG o SH de la API. Escoger el grado de viscosidad SAE del aceite de acuerdo con la temperatura de trabajo anticipada.
  • Page 32 3. Cerciórese de que alambre del interruptor de bag/chute esté conectado con el motor y que puesto a tierra al corchete de montaje. 4. El depósito de gasolina se debe llenar 3/4 por completo antes a empezar. 5. Cuando la temperatura es sobre 32°F (0°C): •...
  • Page 33: Mantenimiento

    Tubo de astillado Boquilla Figura 9 PROGRAMA DE MANTENIMIENTO Lubricación Limpiar el equipo Revisar nivel aceite Campiar aceite motor Limpiar filtro de aire Limpiar la bujía Limpiar el silenciador Limpiar el motor RECOMENDACIONES GENERALES • Siempre respetar las reglas de seguridad durante los trabajos de mantenimiento.
  • Page 34 LUBRICACION • Ruedas - Una vez en la temporada, colocar unas pocas gotas de aceite SAE 30 en cada tornillo de reborde. Ver la figura 13. • Palancas de ajuste de altura de la boquilla - Lubricar estas palancas con aceite ligero. Ver la figura 6.
  • Page 35: Servicio Y Ajustes

    SERVICIO DEL SILENCIADOR • Inspeccionar el silenciador periódicamente y reemplazarlo cuando sea necesario. • Si el motor tiene un chispero, retirarlo cada 50 horas de uso para limpieza e inspección. Reemplazarlo si está dañado. WARNING: No manejar la aspiradora para jardines sin que tenga instalado el silenciador.
  • Page 36 • Apagar el motor. Asegurarse que la máquina está totalmente detenida. • Desconectar el cable de la bujía y conectarlo a tierra antes de desatascar el tubo de descarga. • Ver tener acceso a la rejilla de trituración, retirar el recolector o el tubo de soplado de la máquina como se indica en la sección OPERACION.
  • Page 37 Cuchilla astilladora VISTA DE ABAJO ARRIBA Figura 16 • Aplicar lubricante a las roscas del extractor del rotor y luego enroscar el extractor en el cigüeñal. Parar cuando el rotor se pueda mover en el cigüeñal. • Retirar el rotor del cigüeñal. Desenroscar el extractor del rotor.
  • Page 38: Almacenamiento

    Preparar la aspiradora para jardines Crafstman para su almacenamiento al final de la temporada o si la máquina va a estar sin usar durante 30 días o más. Una revisión anual por el centro de servicio Sears local es una buena manera de asegurar que la máquina funcione perfectamente la temporada siguiente.
  • Page 39: Localización De Averías

    Problema Causas posibles El motor no arranca 1. El tanque de combustible está 2. El cable de la bujía está 3. No se puede tirar de la cuerda 4. El estrangulador está en la 5. La bujía está mala. 6. No se oprimió el interruptor de 7.

This manual is also suitable for:

247.770110

Table of Contents