Mounting In Portrait Orientation; How To Remove The Logo Plate - Philips 50BDL3550Q Manual

1.5.

Mounting in Portrait Orientation

This display can be installed in portrait orientation.
Rotate the display 90 degrees counterclockwise. The "
NOTE: The working hour in portrait mode is 18 hours per day.

1.5.1. How to remove the logo plate

1. Prepare a piece of paper with a cutting area of logo as a
protector to prevent the front bezel from scratching.
2. Use a knife and carefully remove the logo sticker with the
paper placing beneath.
3. Tear off the logo sticker.
NOTE: We recommend you contact a professional technician when installing the display on a wall. We are not responsible for
any damage to the product if the installation is not performed by a professional technician.
90°
43BDL3550Q_50BDL3550Q_55BDL3550Q
" logo should be on the right side when facing the display.
90°
1
3
2
3