Demonstration Function - Pioneer CT-W802R Service Manual

ae
Display | Input key
LINE | 2REC 1REC
MUTE | MUTE |* BIAS) mute
2- OFF
MUTE
10 2-
PAUSE
Adjustment and Check Contents
E It BIAS SWEEP mode
ia pattern display)
Side || LEVEL SWEEP mode
(LEVEL pattern display)
N |
|
Ea] =
Prat
° si
a i
11
REC
ake "
J
= bh
ol : | i :
13 ON OFF
MUTE
1- OFF OFF | OFF
PAUSE
Setting the test mode
short — circuiting the fixed jumper wire.
} Releasing the test mode
The test mode
can be released by pressing the COUNTER
RESET key of side J or turning off the power.
tenes The display will light
up while the COUNTER
MODE key of side I is
pressed only if a short —
circuited cable is connected
to the input/output.
e Input/output signal check.
Side |1 EQ SWEEP mode
(EQ pattern display)
Side | BIAS SWEEP mode
(BIAS pattern display)
OFF Side | LEVEL SWEEP mode
(LEVEL pattern display)
OFF Side | EQ SWEEP mode
(EQ pattern display)
9.12 Demonstration Function
© Mode which performs demonstration display.
} Accepted Conditions
e When both sides IJ and II are in the STOP mode.
} Operations
¢ When both the above conditions are present, the demonstration
mode can be set by pressing the 2- COUNTER RESET key and
2-PAUSE key simultaneously.
¢ This mode can be released by outputting/inputting the ''half"',
key inputs or turning off the power.
59S