Looking After Your Machine - Zanussi DV 45 Instructions For The Use And Care

Looking after your machine
Defrosting
The freezer will become progressively
covered with frost.
This frost, which acts as an insulator and
thus prevents the cold from reaching the
food, should be removed whenever the
frost exceeds 5mm (1/4 inch).
NEVER USE A SHARP METAL
TOOL TO SCRAPE OFF FROST FROM
THE INTERIOR AS YOU COULD
DAMAGE IT.
The frost should be removed with the
special plastic scraper provided.
To carry out complete defrosting proceed
as follows:
wrap frozen food in several layers of
news-paper and place the food packages
in a cool place
Important
A temperature rise of the frozen food
packs during defrosting may shorten
their storage life.
Switch off, and remove the plug from
the wall socket, or turn the thermostat
to the «0» setting.
Leave the freezer door open, and the
door to the fast freeze compartment.
Introduce the plastic scraper in the
appropriate seating at the bottom center,
as shown in figure 3, place underneath a
basin to collect the defrost water.
12