Wimius K1 - Video Projector Manual

Accessories

Product Overview

1. Level-Stand Adjustment
2. IR receiver
3. Focus Lens
4. Power port
5. IR for remote control
6. 3.5mm audio output
7. HDMI 1 port
8. USB port
9. AV port
10. HDMI 2 port
11. Built-in Speaker
12. Cooling window
13. Focus
14. Switch of removable dust cover
15. Removable dust cover

1. Keystrokes (Picture below)
2. Rating label
3. Projector mount holes
4. Level-stand adjustment

1. Power Key
2. Exit
3. OK Key
4. Up Key
5. Down Key
6. Left Key
7. Right Key

Remote Control

1. Power
2. Source
3. Arrow keys
4. Menu
5. Homepape
6. Volume +
7. Volume -
8. Mute
9. Picture flip
10. Confirmation key (Play and Pause)
11. Return
12. Previous (Video)
13. Next (Video)

Note:

1. While using the remote control, point it toward IR receiver.
2. To avoid battery leakage corrosion, please take the batteries out if not use it for a long time.

Specifications

Projection Size Chart

*Optimum projection distance: 3m
Please allow ± 3% to the image sizes in the table above. If the distance is less than min data and more than max data, the image could be blurry.

Device Installation

1. We provide a screw in the packaging, there is a screw hole at the bottom of the projector, you can install it to lift the base of the projector on the plate to get a better projection angle.
   
2. For Ceiling mount, there are 4 holes at the bottom of the projec- tor(M5*16mm). Please slowly rotate it out first.
   
   

Note: The hanging bracket is an accessory that is not supplied.

Operating Instructions

• To get better watching experience, please use it in dark or semi-dark room.
• Please use the projector carefully, dropping or crashing may damage parts or result in blurred images and abnormal displaying.

Getting Started

1. Remove the lens cap, connect the projector with the power through power supply cable, it starts work.
2. Then boot screen appears, like the picture.
   

Focus and Keystone Correction

1. Adjust the keystone correction first.
   How to Use Projection Settings
   Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote control to enter the settings interface and select "Projection Image Setting". After entering the interface, select the mode you want in the projection settings, then adjust the keystone as you want.
   
   1. Vertical Keystone
      When you choose "Keystone Advanced: Front", then you can ajust Manual Keystone (Vertical) between: ±50°, just press the button to set the value.
      
   2. Horizontal Keystone
      When you choose "Keystone Advanced Side", you can set "4-point Keystone"as your need: Horizontal Value ±64, Vertical Value from±36
      Just click "OK" button to pick the point you want adjust at first, and then presse the button " " or " " to set the value needed as shown below.
      
      "OK" - Pick Point
      " " - Adjustment
      " " - back
      " " - More settings
2. Focus Adjustment
   Turn the trackwheel clockwise to bring the trackwheel to the end, then slowly rotate the trackwheel counterclockwise. At the same time, carefully observe the pixels on the screen. When the image particles are the clearest (Subjed to the middle of the image), the pixels on the screen are the best focus of the lens.
   
3. Connect input devices and then choose signal source button to choose corresponding signal source (HDMI1, HDMI2, AV,etc)
   Just operate through the remote control: Press " " and then press " " or " " to choose the corresponding signal input channel, then press "OK'' to confirm.
   

Connecting with Smartphones and iPad

Note: This projector support only Wireless Connection, wired connection is not possible.

P.S: The fluency of screen mirroring with wireless connection will be affected by the network environment. A bandwidth of 100Mbit or more is recommended when using screen mirroring. Make sure your mobile device is closed to the projector when using wireless connection. A distance within 1 meter is recommended.

How to Use WiFi Settings

Select the settings icon in the upper right corner of the main interface, and then press the "OK" key on the remote control to enter the settings interface and select "WiFi Setting".

For IOS System

Setting with Home Wi-Fi
Attention: Your device and the projector should be in the same Home WiFi.

1. Turn on the WiFi Setting of projector.
2. Choose your Home WiFi to connect and enter the right password, then click "Done"to Connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3. Turn on the WiFi setting of your IOS mobile device, then connect it the same Home WiFi as the projector.
   
4. Then click"IOS Cast" as the Input Source of your projector.
5. Swipe up the screen of your iOS mobile device and tap "Screen Mirroring" to search for the projector, then select "WiMiUS-K1Projector" from the searching results to connect.
   1. On your iOS device, open Control Center and Tap Screen Mirroring
      
   2. Looking for devices that can be mirrored on.
      
   3. Select | K1-iOSCast-XXX from the list.
      
6. Succeed.

Make sure that your iOS device is connected to the same network as your projector.

For Android System

To activate this function, your android device must support Multi-Screen/Wireless Display. Name of "Multi-Screen" may vary depending on various brands of Android devices.

Method 1: Setting with mobile internet

1. Turn on the projector, select "Miracast" as the Input Source.
2. Turn on the "Multi-Screen/Wireless Display" of your Android device.
3. Select "WiMiUS-K1Projector"from the searching results to connect.
4. Succeed.

Miracast
To connect Android Mobile/Pad with Projector Based on Wi-Fi Display Technology

1. On your Android Mobile/Pad, open the setting menu
2. Access your display settings or screen-mirroring
3. Select your Miracast receiver: K1-AnCast-XXXX

Method 2: Setting with Home Wi-Fi.

1. Turn on the WiFi Setting of your projector.
2. Choose your Home WiFi to connect and enter the right password, then click "Done" to Connect, please wait 3-5 seconds to establish the connection. Once connected, it will remember the password of the connected WiFi.
3. Turn on the WiFi setting of your Android mobile device, then connect the same Home WiFi as the projector.
4. Select "MiraCast" as the Input Source of your projector.
5. Swipe up the screen of your Android mobile device and tap "Wireless Display" or trun on it in your setting to search for the projector, then select "WiMiUS-K1 Projector" from the searching results to connect.
6. Succeed.

If any questions during connection, email us at support@wimius.com for solution.

Connecting with Bluetooth Speaker

1. Turn on your Bluetooth Speaker.
2. Turn on the Bluetooth Setting of your projector.
   
3. Select your Bluetooth speaker to connect.
4. Succeed.

Compatible with Bluetooth speakers, Bluetooth Headphones, iPhone Airpods, Bluetooth Earbuds, Bluetooth Earphones.

Other connections

Connecting with PC

1. Connect projector with PC by HDMI cable.
2. Choose the media signal channel:"HDMI"

USB Multimedia Connecting

For the USB devices, no need to choose the signal source. The machine will detect them automatically.

1. Select the required category "movie", "music", "photo" or "Office Suite" in the main interface, and press the "OK"key on the remote control to enter the corresponding category.
2. According to the programs to choose:"photos""music""movie" or "Office Suite".
3. Choose the file you want to play, press the key "OK" to play or pause the file. (You cannot enter the required category without connecting a USB disk.)
   Note: For the "Office Suite" option, you can play, demo PPT files.

Connecting with MacBook or Mac Book Air

1. Choose the media signal channel:"HDMI"
2. Use a Type-C to HDMI adapter to connect your MacBook, or a Mini Display to HDMI adapter to connect with your MacBook Air (adapter not included).

Connecting with Sound bar

1. Use the AV cable coming with the projector to connect with sound bar.
2. Turn on the projector and the sound bar.
3. More details, please contact seller at support@wimius.com

Connecting with DVD

1. Use the AV cable coming with the projector to connect with DVD.
   
2. Turn on the projector and DVD player.

Connecting with Amazon fire TV Stick

1. Plug the TV stick into HDMI port of the projector.
2. Choose the media signal channel:"HDMI"

P.S: It only supports 1080P TV stick, not 4K TV stick.

Connecting with XBOX/PS4

1. Choose the media signal channel:"HDMI"
2. Use HDMI cable connect to XBOX/PS4

Warm tips:
If you want to make the projection screen full screen during video/picture playback, you can press the " " button on the projector or remote control.

Main Menu Function

1. Picture Mode
   Only when you play the video you can set the "Picture Mode".
   Press " " and then select the setting on the remote control to make some personal settings.
   

Note: If the menu icon is gray, it means that this option is not adjustable. Press "Menu" button on the remote twice to switch from 16:9 and 4:3.

2. Sound Mode
   Only when you play the video you can set the "Sound Mode".
   

3. Projection Image Setting
   

4. System Update
   

5. Other Setting
   

6. About the version of system
   

FQA

Safety Precautions

High brightness lamp! Don't look straight into the lens when the projector is on.

1. Clean
   When clean this projector, please pull out the power cable. Use a wet cloth to clean, don't use any detergent that may damage the unit.
2. Accessory
   Please use our recommended accessory. Or it will damage the projector.
3. Correct environment
   Do not place the projector in a wet environment, like damp basement or near the swimming pool, etc.
4. Ventilation
   The ventilation is equipped for the projector to work stably. Do not put anything around the vents. Or it will cause the projector heating up. To ensure the stability of heat dissipation, please open the height bracket in the bottom of the projector before starting.
5. Power
   Please make sure the power is within the required power range.
6. Thunder
   For thunder day, please unplug the power cable from the projector.
7. Repair
   Due to high voltage inside, please do not open or try to repair the projector by yourself. Please ask a professional technician to repair the projector.
8. Keep away from heat device
   Please make sure the projector is far away from any heat devices which will damage the projector.

Contact us

If you have questions about the projector, please contact us at support@wimius.com
Email: support@wimius.com
Website: www.wimius.com

Documents / Resources

References

• Wimius Official Shop ｜Wimius Projector Online

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Wimius K1 - Video Projector Manual