Table of Contents
Advertisement
Screen height adjustment
To adjust the screen height when placing
the projector on a flat surface, turn the angle
adjustment knob located at the bottom of the
projector.
Image shape adjustment
V/H Keystone
You can manually make the image rectangular
by adjusting the horizontal and vertical
keystone angles.
1
Press
on the remote control to open
the settings menu, go to Projector > V/H
Keystone and press the OK button.
2
Follow the on-screen instructions to adjust
the image shape.
Four Point Keystone
You can manually make the image rectangular
by moving four corners of the image.
1
Press
on the remote control to open the
settings menu, go to Projector > Four Point
Keystone and press the OK button.
2
Follow the on-screen instructions to adjust
the image shape.
Select the language
When you turn on the projector for the first
time or after it was reset to its factory default
settings, the projector system will start and
prompt you to select the language.
Press the navigation buttons to select your
preferred display language and press the OK
button to confirm.
After selecting the language, you can start
using the projector or continue to make other
adjustments.
Tip: To change the language later, press
the remote control to open the settings menu,
then select System > Language.
10
4 Connect to other
devices
Connect to a playback
device through HDMI™
You can connect a playback device (e.g. a Blu-
ray player, gaming console, camcorder, digital
camera or PC) to the projector through HDMI™
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1
Using an HDMI™ cable, connect the HDMI
port on the projector to an HDMI™ output
port on a playback device.
Phones
Tablets
Computers
Connect to a device through
HDMI™ ARC
The HDMI port on the projector supports
Audio Return Channel (ARC). You can connect
a compatible audio system (e.g. a home
cinema system, AV receiver or sound bar) to
the projector through HDMI™ ARC connection.
With this connection, audio is streamed to the
connected audio system.
Tip: To get 5.1 surround sound, you typically
need to connect the projector to a 5.1 home
cinema system.
1
Using an HDMI™ cable, connect the HDMI
port on the projector to the HDMI™ ARC
on
port on a compatible audio system.
•
The HDMI™ ARC port on your audio
system might be labeled differently.
See the documentation supplied with
the device for more information.
USB
HDMI
Smart Sticks
Game consoles
DVD/VCR
Philips · NeoPix 330
Advertisement
Table of Contents
