Virtual Server - D-Link Go-RT-N300 User Manual

Section 3 - Configuration
This will allow you to open a single port or a range of ports to a computer or device.
Usual Service
Select an application from the drop-down menu or type a
Name:
name in the next field.
User-defined
Enter a name for your rule.
Service Name:
Protocol: Select TCP or UDP from the Protocol drop-down menu.
WAN Port:
Enter the WAN port number.
LAN Open Port:
Enter the LAN port number.
LAN IP Address: Enter the IP address of the computer or device on your local
network that you want to allow the incoming service to.
Click the Apply Changes button to save any changes made.
The virtual server will then be added to the Current Virtual
Server Forwarding Table below.
To delete or disable a virtual server, click the Delete or
Disable button in the Action field of the rule in the table.
D-Link GO-RT-N300 User Manual

Virtual Server

37