Advertisement
Available languages
Available languages
PICTURE IN PICTURE (PIP) OPERATION
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature.
A second video source (VCR) is
required to provide a second picture.
Connect your television to a VCR, as shown.
TERMINALS ON BACK OF TV
{may vary)
INCOMING
CABLE
CABLES NOT SUPPLIED
Note:
The remote control must be programmed with the supplied codes to operate the VCR.
See Programming the Remote Control in the Remote
Control Quick Reference
Guide.
Procedure
Turn the VCR OFF and tune the PTV to channel 3.
Press the PIP button on the remote contro! to display the PIP frame on screen.
Note: _ initiaily, the PIP picture is the same as the Main Picture.
°
Press the TV/VIDEO
button on the remote control to select the VIDEO
PIP
source.
°
Press the VCR button on the remote control and turn ON the VCR.
°
Press the TV/VCR button on the remote control.
°
Choose channels for P/P frame by pressing VCR CHANNEL up/down buttons on
the remote control.
«
Choose channels for the Main Picture by pressing the TV button on the remote
control and using the numeric keypad or CH up/down buttons.
sa ed
~y NE
SWAP Button
ay i~
The
SWAP
button
switches
the PIP and
Main
Picture source.
Press the RECALL
button for
onscreen PIP and Main Picture source status.
Advertisement
Chapters
