Table of Contents
Advertisement
Time-setting options
en
OTime-setting options
Y our hob has two timer functions:
T i m e - s e t t i n g o p t i o n s
Programming the cooking time
■
Kitchen timer
■
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
Select the hotplate and the required heat setting.
1.
Touch the
symbol.
0
2.
the hotplate.
lights up on the timer display.
‹‹
Within the next 10 seconds, set the required cooking
3.
time in the settings range.
After a few seconds, the time begins to elapse.
Notes
The same cooking time can be set automatically for
■
all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically
programming the cooking time in section ~ "Basic
settings"
If the flexible cooking zone is selected as the only
■
hotplate, the set time for the entire cooking zone is
the same.
Changing or cancelling the time
Select the hotplate and then press the
Change the cooking time using the programming zone
or set to
in order to cancel the time.
‹‹
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up
the display.
When the
symbol is pressed, the indications turn off
0
and the beeping stops.
Notes
If a cooking time was programmed for several
■
hotplates, the time information for the selected
hotplate is shown in the timer display.
You can set a cooking time of up to 99 minutes.
■
14
lights up on the display for
x
symbol.
0
for 10 seconds in
‹‹
The kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes.
This functions independently from the hotplates and
from other settings. This function does not automatically
switch off a hotplate.
Setting procedure
Touch the
symbol repeatedly until the
0
1.
indicator lights up.
‹‹
Set the required time in the control panel.
2.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Touch the
symbol repeatedly until the
0
lights up. Change the time in the control panel or set it
to
.
‹‹
When the time has elapsed,
An audible signal sounds.
display and the
indicator lights up. The displays go
V
out after 10 seconds.
When the
symbol is touched, the indicators go out
0
and the acoustic signal ceases.
V
lights up on the timer display.
indicator
V
‹‹
appears in the timer
Advertisement
Table of Contents
