•
"1010 Bottom cover" on page 56
Removal steps of the wireless LAN card
Step
Screw (quantity)
2
For non-touch model: M2 × L3 mm, flat cross head,
nylon-coated (1)
2
For touch model: M1.8 × L3 mm, flat star head, nylon-coated (1)
When installing: Attach the gray cable to the connector marked "MAIN" on the card, and attach the black
cable to the connector marked "AUX".
1050 Memory module
For access, remove this FRU:
•
"1010 Bottom cover" on page 56
This topic only applies to the memory module that is seated in the memory slot. The memory module of your
computer might be seated in the memory slot or soldered on the system board. If the memory module is
soldered on the system board, it cannot be replaced.
1
Color
Black
Black
.
Chapter 7
Removing or replacing a FRU
Torque
0.181 Nm
(1.85 kgf-cm)
0.181 Nm
(1.85 kgf-cm)
61