1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. [ideacentre 510A-15ARR/Energy Star
  6. Hardware maintenance manual

Lenovo [ideacentre 510A-15ARR/Energy Star Hardware Maintenance Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Questo manuale d'istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per
510 90HU00GXIX
ideacentre 510/510A Series Hardware
Maintenance Manual
Machine Types: 90J0 [ideacentre 510A-15ARR/Energy Star] / 90HU
[ideacentre 510-15ICB/Energy Star] / 90HV [ideacentre 510A-15ICB/
Energy Star]
o cerca il tuo prodotto tra le
migliori offerte di PC Desktop e Workstation
Lenovo IdeaCentre

Advertisement

Table of Contents
loading

Related Manuals for Lenovo [ideacentre 510A-15ARR/Energy Star

Summary of Contents for Lenovo [ideacentre 510A-15ARR/Energy Star

  • Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Lenovo IdeaCentre 510 90HU00GXIX o cerca il tuo prodotto tra le migliori offerte di PC Desktop e Workstation ideacentre 510/510A Series Hardware Maintenance Manual Machine Types: 90J0 [ideacentre 510A-15ARR/Energy Star] / 90HU...
  • Page 3 ideacentre 510/510A Series Hardware Maintenance Manual Machine Types: 90J0 [ideacentre 510A-15ARR/Energy Star] / 90HU [ideacentre 510-15ICB/Energy Star] / 90HV [ideacentre 510A-15ICB/ Energy Star]...
  • Page 4 First Edition (January 2018)3rd © Copyright Lenovo 2017. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software are delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 5: Table Of Contents

    Replacing the front Wi-Fi antenna ..Replacing the rear Wi-Fi antenna ..Starting the Lenovo BIOS Setup Utility program . . Replacing the heat-sink and fan assembly ..
  • Page 6 ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    This manual contains service and reference information for Lenovo ideacentre 300 series desktop computers listed on the cover. It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information.
  • Page 8 ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 9: Chapter 2. Safety Information

    Electrical current from power, telephone, and communication cables can be hazardous. To avoid personal injury or equipment damage, disconnect the attached power cords, telecommunication systems, networks, and modems before you open the computer covers, unless instructed otherwise in the installation and configuration procedures. © Copyright Lenovo 2017...
  • Page 10 Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.

  • Page 11: Safety Inspection Guide

    – Send another person to get medical aid. Safety inspection guide The intent of this inspection guide is to assist you in identifying potentially unsafe conditions on these products. Each machine, as it was designed and built, had required safety items installed to protect users and service personnel from injury.

  • Page 12: Grounding Requirements

    • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people while handling the part. • Wear a grounded wrist strap against your skin to eliminate static on your body. • Prevent the part from touching your clothing. Most clothing is insulative and retains a charge even when you are wearing a wrist strap.
  • Page 13 To Connect To Disconnect 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2. First, remove power cords from outlet. 3. Attach signal cables to connectors. 3. Remove signal cables from connectors. 4. Attach power cords to outlet. 4.
  • Page 14 ≥18 kg(37 lbs) ≥32 kg(70.5 lbs) ≥55 kg(121.2 lbs) CAUTION: Use safe practices when lifting. CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

  • Page 15: Chapter 3. General Information

    This section lists the physical specifications. Environment Air temperature: Operating: 10° to 35°C Transit: -20° to 55°C Humidity: Operating: 35% to 80% Transit: 20% to 90% (40°C) Altitude: 86KPa to 106KPa Electrical input: Input voltage: 90V-264V(AC) Input frequency: 47Hz-63Hz © Copyright Lenovo 2017...
  • Page 16 ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 17: Chapter 4. General Checkout

    • If the computer displays a POST error, go to “POST error codes”. • If the computer hangs and no error is displayed, continue at step 7. 7. If the test stops and you cannot continue, replace the last device tested. © Copyright Lenovo 2017...
  • Page 18 ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 19: Chapter 5. Using The Setup Utility

    1. If your computer is already on when you start this procedure, shut down the operating system and turn off the computer. 2. Press and hold the F1 key, and then turn on the computer. When the Lenovo BIOS Setup Utility program is displayed, release the F1 key.
  • Page 20 5. Select Save changes and Exit from the menu. Power-On Password When a Power-On Password is set, you cannot start the Lenovo BIOS Setup Utility program until a valid password is typed from the keyboard. Setting, changing, or deleting a Power-On Password...

  • Page 21: Enabling Or Disabling A Device

    Note: A password can be any combination of letters and numbers up to 16 character (a-z, and 0-9). To set a Power-On Password, do the following: 1. Start the Lenovo BIOS Setup Utility program (See ”Starting the Lenovo BIOS Setup Utility program” on page 13.) 2.

  • Page 22: Selecting A Startup Device

    Agent. 4. Select Disabled or Enabled and then press the Enter key. 5. Return to the Lenovo BIOS Setup Utility program menu and select the Exit option. 6. Select Save changes and Exit from the menu. Note: If you do not want to save the settings, select Discard changes and Exit from the menu.

  • Page 23: Exiting The Lenovo Bios Setup Utility Program

    Exiting the Lenovo BIOS Setup Utility program After you finish viewing or changing settings, press the Esc key to return to the Lenovo BIOS Setup Utility program main menu. You might have to press the Esc key several times. Do one of the following: •...
  • Page 24 ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 25: Chapter 6. Symptom-To-Fru Index

    Reseat connectors Check that the following are properly installed: • Power Cord • On/Off Switch connector • System Board Power Supply connectors • Microprocessor(s) connection Check the power cord. Power Cord Check the power-on switch. Power-on Switch © Copyright Lenovo 2017...

  • Page 26: Post Error Codes

    POST error codes Each time you turn the computer on, it performs a series of tests to check that the system is operating correctly and that certain options are set. This series of tests is called the Power-On Self-Test, or POST. POST does the following: •...

  • Page 27: Chapter 7. Locating Connectors, Controls And Components

    3. Optical drive eject button 8. USB 3.0 connectors (2) 4. Optical Drive 9. USB 2.0 connectors (2) 5. Memory card reader Attention: Be careful not to block any air vents on the computer. Blocked air vents can cause overheating. © Copyright Lenovo 2017...
  • Page 28 Table 2. ideacentre 510/510A-15ICB 1. Power button 6. Microphone connector 2. Storage drive indicator 7. Combo audio jack 3. Optical drive eject button 8. USB 3.0 Type-C connector 4. Optical Drive 9. USB 3.0 connectors (2) 5. Memory card reader 10.
  • Page 29 Rear view The following illustrations show the location of connectors and components on the rear of the 310 series computers. Table 3. ideacentre 510A-15ARR 1. Audio connectors 5. Ethernet connector 2. HDMI-out connector 6. Wi-Fi antenna 3. VGA-out connector 7. Expansion card slots 8.
  • Page 30 Table 4. ideacentre 510/510A-15ICB 1. Headphone connector 5. Ethernet connector 2. VGA-out connector 6. Wi-Fi antenna 3. HDMI-out connector 7. Expansion card slots 4. USB 2.0 connectors (4) 8. Power connector ideacentre 510/510A Series Hardware Maintenance Manual...
  • Page 31 Hardware components The following illustration shows the components that make up your computer. 1. Power supply assembly 12. Thermal sensor 2. PCI express adapter card 13. Optical drive 3. Rear system fan 14. Storage drive 4. Motherboard 15. Front I/O assembly (including the card reader) 5.
  • Page 32 6. Memory module 17. Mouse 7. Power button board 18. Keyboard 8. Computer cover 19. Power cord 9. Chassis 20. SATA cable (for connecting the storage drive) 10. Front bezel 21. SATA cable (for connecting the optical drive) 11. Front Wi-Fi antenna Identifying parts on the motherboard The motherboard (sometimes called the planar or system board) is the main circuit board in your computer.
  • Page 33 7. M.2 Wi-Fi card slot 19. Microphone connector 8. SATA power connector 20. Memory slots (2) 9. SATA 3.0 connector 21. Microprocessor fan connector 10. SATA 3.0 connector 22. Microprocessor socket 11. M.2 storage drive connector 23. 4-pin power connector 12.
  • Page 34 11. SATA 3.0 connectors (2) 24. Microprocessor socket 12. SATA 3.0 connector 25. 4-pin power connector 13. Auxiliary fan connector ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 35: Chapter 8. Replacing Hardware

    Attention: Do not remove the computer cover or attempt any repair before reading the “Important safety information” in the Safety and Warranty Guide that was included with your computer. To obtain copies of the Safety and Warranty Guide, go to the Support Web site at: http://consumersupport.lenovo.com. Note: Use only parts provided by Lenovo.

  • Page 36: Replacing The Keyboard And Mouse

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 37: Replacing The Power Supply Assemby

    Step 5. To reinstall the computer cover: Line up the computer cover with the chassis, and then slide it back. Secure the computer cover to the chassis with the screws. Replacing the power supply assemby Note: For this procedure, it helps to lay the computer flat. To replace the power supply assembly: Step 1.

  • Page 38: Removing The Front Bezel

    Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches or other damage.

  • Page 39: Replacing An Optical Drive

    Step 6. To reattach the bezel: Align the three plastic tabs on the right side of the front bezel with the corresponding holes in the chassis. Then, pivot the front bezel inward until it snaps into position. Step 7. Reinstall all the removed parts, and then reconnect the cables. Replacing an optical drive Note: For this procedure, it helps to lay the computer flat.

  • Page 40: Replacing The M.2 Storage Drive

    Step 8. To install the new optical drive: Insert the new optical drive into the chassis until it locks into place. Connect the data and power cables to the new optical drive. Step 9. Reinstall all the removed parts. Replacing the M.2 storage drive Note: For this procedure, it helps to lay the computer flat.

  • Page 41: Replacing The Storage Drive

    Step 7. To install the new M.2 storage drive： Insert the new M.2 storage drive into the M.2 slot. Secure the new M.2 storage drive to the motherboard with one screw. Step 8. Reinstall all the removed parts, and then reconnect the cables. Replacing the storage drive Note: For this procedure, it helps to lay the computer flat.

  • Page 42: Replacing The Front Card Reader

    Step 10. To install the new 3.5-inch storage drive： Slide the new 3.5-inch storage drive into the drive bay. Secure the new 3.5-inch storage drive to the drive bay with the four screws. Connect the power and data cables to the 3.5-inch storage drive. Pivoting the drive bay assembly downward.

  • Page 43: Replacing The Pci Express Card

    Step 9. Remove the two screws that secure the card reader to the front I/O assembly. Step 10. Remove the card reader from the front I/O assembly. Step 11. Install the new card reader : Align the new card reader into position, and then secure it to the front I/O assembly with two screws.

  • Page 44: Replacing A Memory Module

    Step 8. Press the card retaining latch as shown to disengage the latch. Grasp the card and gently pull it out of the slot Step 9. To install the new PCI Express card: Insert the new PCI Express card into the appropriate PCI Express card slot on the motherboard.
  • Page 45 Step 10. Position the new memory module over the memory slot. Ensure that the notch on the memory module aligns correctly with the slot key in the memory slot. Press the memory module down until snaps into position. Step 11. To replace a UDIMM memory module, refer to the following instructions: Step 12.

  • Page 46: Replacing The Wi-Fi Card

    Step 14. Pivot the drive bay assembly downward. Step 15. Reinstall all the removed parts, and then reconnect the cables. Replacing the Wi-Fi card Note: For this procedure, it helps to lay the computer flat. To replace the Wi-Fi card: Step 1.

  • Page 47: Replacing The Front Wi-Fi Antenna

    Step 11. Install the new Wi-Fi card: Line up the new Wi-Fi card, and then insert it into the same card slot. Connect the 2 antenna cables to the new Wi-Fi card. Secure the Wi-Fi card to the motherboard with one screw. Step 12.

  • Page 48: Replacing The Rear Wi-Fi Antenna

    Route the new Wi-Fi antenna cable through the corresponding hole, and then stick the new Wi-Fi antenna to the front panel. Connect the new Wi-Fi antenna cable to the Wi-Fi card. Step 9. Reinstall all the removed parts, and then reconnect the cables. Replacing the rear Wi-Fi antenna Note: For this procedure, it helps to lay the computer flat.

  • Page 49: Replacing The Microprocessor

    Step 8. Lift the failing heat sink and fan assembly off the motherboard. Note: Do not touch the thermal grease while handling the heat sink and fan assembly. Step 9. To install the new heat-sink assembly: Position the new heat sink and fan assembly on the motherboard so that the four screws are aligned with the holes in the motherboard.
  • Page 50 Step 9. Lift the microprocessor straight up and out of the microprocessor socket. Note: a. Your microprocessor and socket might look different from the one illustrated. b. Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom. c.

  • Page 51: Replacing The Front Fan

    Note: The small triangle on one corner of the new microprocessor is the microprocessor orientation indicator. The new microprocessor is in the correct orientation when this indicator points to the beveled corner of the microprocessor socket. Step 13. Close the microprocessor retainer and lock it into position with the small handle to secure the new microprocessor in the socket.

  • Page 52: Replacing The Rear Fan

    Step 9. To install the new system fan: On the inside of the front panel, push the four rubber mounts on the new system fan through the corresponding holes in the chassis. On the outside of the front panel, pull the tips of the rubber mounts until the system fan is secured in place.

  • Page 53: Replacing The Motherboard

    On the inside of the rear panel, push the four rubber mounts on the new rear fan through the corresponding holes in the chassis. On the outside of the rear panel, pull the tips of the rubber mounts until the rear fan is secured in place.
  • Page 54 Step 16. Lift up the motherboard to remove it. Step 17. Install the new motherboard: Line up the holes on the new motherboard with mounting holes on the chassis and secure it with seven screws. Step 18. Reinstall all the removed parts, and then reconnect the cables. ideacentre 510/510A Series Hardware Maintenance Manual...

  • Page 55: Chapter 9. Fru Lists

    Chapter 9. FRU lists This chapter lists the information on the field replaceable units (FRUs) for Lenovo ideacentre 510 and 510A series computers. Attention: Be sure to read and understand all the safety information before replacing any FRUs. Notes: FRUs that have a 1 or 2 in the CRU column are Customer Replaceable Units (CRUs).
  • Page 56 Keyboard Mouse Cmos battery Front Fan Rear Fan RF Antenna FRU=RF cable*2 Antenna Cover Wi-Fi Card Wi-Fi Card Cover Optional USB ports Optional Card reader kit FRU list of ideacentre 510A–15ARR FRU P/N Description ANTENNA 00XJ134 Fru, 15L New Rear antenna 00XJ133 Fru, Lx 15L New Front antenna BDPLANAR...
  • Page 57 00XH961 USB Calliope KB SR HBW 00XH959 USB Calliope KB SR GRE 00XH965 USB Calliope KB SR JPN 00XH633 USB Calliope KB BK NORDIC 00XH968 USB Calliope KB SR LA SPA 00XH978 USB Calliope KB SR SWS 00XH976 USB Calliope KB SR SPA 00XH611 USB,Calliope,KB,BK,LA SPA 00XH973...
  • Page 58 00XH990 USB Calliope KB SR NORDIC 00XH587 USB Calliope KB BK ENG 00XH987 USB Calliope KB SR IND ENG 00XH981 USB Calliope KB SR TUR 00XH979 USB Calliope KB SR THAI 00XH588 USB Calliope KB BK ARA 00XH994 USB KB SLV_CZ-SL 00XH618 USB Calliope KB BK SLK 00XH619...
  • Page 59 00XH892 WL KM Calliope SR Nordic 00XH889 WL KM Calliope SR IND ENG 00XH875 WL KM Calliope SR RUS 00XH854 WL KM Calliope SR CZE 00XH864 WL KM Calliope SR HUN 00XH863 WL KM Calliope SR HBW 00XH861 WL KM Calliope SR GRE/UK 00XH873 WL KM Calliope SR POR 00XH851...
  • Page 60 00XL023 Fru, LINECORD,GB,1.8M,3P,NON-LH 00XL050 Fru, LINECORD,TH,1.8M,3P,NON-LH 00XL042 Fru, LINECORD,AU,1.8M,3P,NON-LH 01YW102 Fru, LINECORD,TW,1.8M,3P,NON-LH 00XL016 Fru, EU/KR,1.8M,3P,NON-LH 00XL018 Fru, LINECORD,TW,1.8M,3P,NON-LH 00XL022 Fru, LINECORD,IN,1.8M,3P,NON-LH 00XL014 Fru, EU/KR,1.8M,3P,NON-LH 00XL045 Fru, LINECORD,DK,1.8M,3P,NON-LH 00XL027 Fru, LINECORD,IL,1.8M,3P,NON-LH 00XL032 Fru, LINECORD,BR,1.8M,3P,NON-LH 00XL001 Fru, JP,Anti-TR,1.8M,3P,NON-LH 00XL035 Fru, LINECORD,AR,1.8M,3P,NON-LH 00XL037 Fru, LINECORD,AR,1.8M,3P,NON-LH 00XL034 Fru, LINECORD,BR,1.8M,3P,NON-LH...
  • Page 61 01EF792 333HT1,Odd-door ASSY,AVC 01EF774 333ET1,Side-Cover,AVC 00XD328 HDMI_COVER Kit 01EF773 333ET1,Base-chassis,AVC 01EF905 M.2 SSD Brkt Assy(213mm MB) MECHANICAL 01MN426 AVC Wi-Fi Card Small Cover 00XD436 VGA rubber cover 01MN670 AVC,AMD Knoll R/IO Shielding MEMORY 01AG839 8GB DDR4 2666 UDIMM,Micron 01AG826 4GB DDR4 2666 UDIMM,Hynix 01AG828 16GB DDR4 2666 UDIMM,Hynix 01AG845...
  • Page 62 PWR_SUPPLY 00PC746 100-240Vac,SFF 210W PSU 00PC745 100-240Vac,SFF 180W PSU 00PC750 100-240Vac,SFF 180W PSU MOUSE 00PH131 USB Calliope Mouse Black(Orange wh 00PH143 Chicony USB Fingerprint MC B_O OPT_DRIVE 45K0494 9.0mm DVD Rambo without bezel RUBBER 01EF846 Graphic Card Rubber 15L,AVC VIDEO_CARD 01AJ846 BLD GT730 1GB DDR5 64Bit 01AJ860...

  • Page 63: Chapter 10. General Information

    • Wake Up on Alarm: You can specify a date and time at which the computer will be turned on automatically. This can be either a single event , a daily event or a weekly event. • Wake Up on LAN: This feature allows LAN adapter card to wake the System. © Copyright Lenovo 2017...

This manual is also suitable for:

Ideacentre 510a seriesIdeacentre 510 seriesIdeacentre 510-15icb/energy starIdeacentre 510a-15icb/ energy starIdeacentre 510 90hu00gxix90j0 ... Show all

Table of Contents