14 WHEELS, TIRES
14.1
14.2
76
Removing the front wheel
F02831-10
F02734-10
Installing the front wheel
Warning
Danger of accidents Oil or grease on the brake discs reduces the braking effect.
–
Always keep the brake discs free of oil and grease.
–
Clean the brake discs with brake cleaner when necessary.
Preparatory work
–
Raise the motorcycle with the rear lifting gear. (
–
Lift the motorcycle with the front lifting gear. (
Main work
–
1
Remove screws
with washers and push the fender
slightly to the side.
–
2
Remove screw
and pull wheel speed sensor
the hole.
–
4
Loosen screw
by several rotations.
–
5
Loosen screws
.
–
4
Press on screw
to push the wheel spindle out of the axle
clamp.
–
4
Remove screw
.
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Hold front wheel and remove wheel spindle. Take the front
wheel out of the fork.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
–
6
Remove spacers
.
p. 51)
p. 52)
3
out of