Table of Contents
Advertisement
Assembly procedures
The following assembly instructions are for right-hand swing doors. For left-
hand swing doors, please invert the interior assembly for installation. Use the
appropriate installation method for the strike plate according to the actual door
swing direction.
Pass the connecting cables of the
1
exterior assembly through the door
hole.
Insert the connecting
3
cables of the exterior
assembly into the interior
assembly.
Attention
Be sure to hide any extra connecting cables within
the door hole.
6
Secure the mounting plate with
2
screws.
Install the interior
4
assembly and secure it
with screws.
Install the strike plate and
5
secure it with screws.
Attention
After installation completed, please check if
all components are properly connected and
assembled in good condition.
Advertisement
Table of Contents
