Logging Out; Text Messaging Service - Motorola APX 8000 User Manual
Hide thumbs
Also See for APX 8000:
- Quick start manual ,
- User manual (112 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
MN001425A01-AW
Chapter 7 : Advanced Features
•
In ARS Non-Server Mode, the display shows the User Login Indicator icon, the ID, and
Logged in, with Logt and Exit.
•
In non-ARS enabled mode, the display shows Offline, with Logt and Exit.
One of the following scenarios occurs:
•
If the user name is invalid, login fails and the user login failure indicator (IP indicator) icon blinks.
The display also shows Login failed.
•
If the PIN is invalid, login fails and the user login failure indicator (IP indicator) icon blinks. The
display also shows Login failed.
•
Wait for the logged in confirmation screen. If the login process is successful, the display shows the
successful user login indicator (IP indicator) icon and Logged in, with Logt and Exit.
NOTE: To cancel the login process and return to the initial user login screen, press the Menu
Select button directly below Cncl.
7.15.2.2
Logging Out
Prerequisites: When you have logged in or you are using Offline mode, you can log out.
When and where to use:
NOTE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder.
The next user is able to access the Inbox, Draft, and Sent messages if private data is not
deleted.
Procedure:
1 Press the Menu Select button directly below Logt.
One of the following scenarios will occur:
•
The display shows Clear private data?. Proceed to the next step.
•
If the Delete Messages On Session End feature is enabled, the radio clears the private data
and returns to User Login screen.
2 Perform one of the following actions:
•
Select Yes to clear all your private data. The display shows Private data cleared.
•
Select No to keep your private data.
7.16
Text Messaging Service
This feature only supports Model 3.5 and Model 2.5.
Text Messaging Service (TMS) allows you to send and receive messages and run database queries
directly from your radios. The maximum number of characters allowed for a text message is 200
characters.
The types of text messages available are:
•
A new text message (free form message).
NOTE: This text message type is only available for Model 3.5.
84
Advertisement
Table of Contents
