Brother HL-L9300CDW Service Manual page 169

9.6 Fuser Unit
(1) Remove the two Taptite bind B M4x12 screws from the Fuser cover R.
(2) Release the two Hooks and remove the Fuser cover R from the Main body.
Main body
(3) Disconnect the two Connectors (CN1 and CN2) from the Eject sensor PCB ASSY.
Connector
Eject sensor
*
PCB ASSY
Assembling Note:
* Center thermistor has a black and blue connectors (230V models only).
The black connector may be connected to the blue insertion port and vice versa.
Fig. 3-16
CN1
CN2
Fig. 3-17
3-28
Hook
Fuser cover R
<Back side>
Taptite bind B M4x12
Connector
(Center thermistor
*
harness )
CN1
CN2
<Back side>
Confidential