Motorola VerveLoop SH011 - Wireless Headphones Quick Start Guide

Table of Contents

Contents

1 Overview
2 Power on
3 Pair with Bluetooth
4 Buttons Operation
5 Status Lights
6 Charge Level Check
7 Reset
8 Hubble Connect for VerveLife
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Overview

MODEL: VerveLoop
Frequency Band: 2.400 – 2.4835 GHz
Maximum RF power: 6.7 dBm
Product ID: SH011
Bluetooth ID: D033170
FCC-ID: VLJ-SH011
IC: 4522A-SH011

Overview

Note: Before use, charge until the status light turns blue.

Power on

Press and hold Power

Pair with Bluetooth

Turn on Bluetooth on your device.
Turn on your wireless earbuds.
On your device, go to the Bluetooth menu to pair & connect.
Enter 0000 if prompted.
When the device and earbuds connect, you'll hear a tone.

Buttons Operation

Music
play/pause	press
volume down/up	short press or
previous / next track	long press or
change EQ setting	press and at the same time during music playback
Calls
answer/end call/ receive call in call waiting mode and music mode	press
mute during call	press and hold and
reject a call	press and hold or
Voice
to issue a voice command	double press during idle mode, then say the command

Note: Voice control may not work on some devices or in all languages.
Some features are phone/ network dependent.

Status Lights

Pairing mode	blue indicator blinks twice repeatedly
Connected	blue indicator blinks twice periodically
Low battery	red indicator blinks slowly
Charging	steady red
Full charge	steady blue
Power off	blue indicator comes on for 1 sec

Charge Level Check

Press and hold and together in idle mode

Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery may damage the product and void your warranty.

Reset

Turn off Bluetooth for all connected devices. Turn off the wireless earbuds, then press and hold and both volume buttons until the status light shows alternating red and blue for five times. You'll hear a tone.

Hubble Connect for VerveLife

Hubble Connect for VerveLife can greatly enhance your earbud experience. Download app for free at the App Store or Google Play (Android 4.3 or higher)

Locate a lost earbud: Locate on a map the last time your earbud was connected to your device.
Voice Prompts (Android only): Choose either English voice prompt or tone.