Table of Contents
Advertisement
Item
[Print Mode when Output
Color - Auto]
[Country/Region]
[Status Indicator (Green)]
[Data Indicator]
[Paused Job Handling]
[First Page Printing
Optimization]
[End of Drum Life]
5.3
[App Settings]
[Print Settings]
[Allocate Memory]
Sets memory capacity to use for each printer mode.
Important
When memory capacity is changed, memory is reset. Therefore, all data stored in each memory area is
erased.
Sets the printing mode switching method depending on the type of
document.
[Standard]
Prints in monochrome until the first color page, then the
subsequent pages are printed in color.
[High Speed]
Prints in color.
[Conserve Supplies]
Prints by determining with the document type (color/
monochrome).
Sets the correct country or region where the machine is installed.
The machine restarts and then the settings are enabled.
Note
This setting must be set correctly, or else Wi-Fi connection and other
functions may violate the laws of each country or region.
Enables the lamp which lights/flashes while the machine is
performing some operation such as during active jobs.
Sets Data Indicator.
Sets the handling method after operation of a job that has been
started is paused, and left until the specified with [Auto Clear] has
elapsed.
Sets which state to stand by in, color print or B & W print.
Sets whether to stop or continue printing when the drum cartridge
becomes unusable.
Description
5.3 [App Settings]
73
Advertisement
Table of Contents
