Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG L 75270 FLP
Summary of Contents for AEG L 75270 FLP
- Page 1 L 75270 FLP EN WASHING MACHINE USER MANUAL L 75470 FLP...
-
Page 2: Table Of Contents
CONTENTS 4 SAFETY INFORMATION 5 TECHNICAL INFORMATION 7 PRODUCT DESCRIPTION 7 ACCESSORIES 8 CONTROL PANEL 11 PROGRAMMES 14 BEFORE FIRST USE 14 USING THE APPLIANCE 14 LOADING THE LAUNDRY 14 FILLING THE DETERGENT AND ADDITIVES 16 SETTING AND STARTING A PROGRAMME... - Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the appli- ance. Always keep these instructions with the... -
Page 5: Technical Information
ENGLISH • Do not install and connect a damaged Electrical connection appliance. • Make sure that the appliance is earth- • Make sure to remove all packaging and transport bolts. • Make sure that the electrical informa- • Make sure that the mains plug is dis- tion on the rating plate agrees with the connected from the mains socket dur- power supply. - Page 6 Cold water Water supply Maximum load Cotton 7 kg Spin speed Maximum 1200 rpm (L 75270 FL) 1400 rpm (L 75470 FL) 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
-
Page 7: Product Description
ENGLISH PRODUCT DESCRIPTION Worktop Feet for the appliance level Detergent dispenser Water drain hose Control panel Water inlet valve Door handle Mains cable Rating plate Transit bolts Drain pump Feet for the appliance level ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of the... -
Page 8: Control Panel
CONTROL PANEL On/Off button (On / Off) The AUTO Stand-by function automatical- ly deactivates the appliance to decrease Programme knob the energy consumption when: Display • You do not use the appliance for 5 mi- Start Pause button (Start/Pauza) nutes before you press button Delay start button (Opóźniony start) - Page 9 ENGLISH • The display symbols. Symbols Description Washing phase Rinse phases Spin phase Child lock You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off. If the programme is completed but the symbol stays on: •...
- Page 10 10 www.aeg.com • You press the buttons. EXTRA RINSE BUTTON • The programme is completed. Press button to add rinsing phases to • The appliance has a malfunction. a programme. To deactivate/activate the acoustic sig- Use this function for persons allergic to...
-
Page 11: Programmes
ENGLISH PROGRAMMES Programme Type of load Cycle Functions Temperature max. weight of load description Bawełniane White and coloured Wash SPIN REDUCTION 95° - Cold cotton with normal Rinses RINSE HOLD soil. Long spin STAIN max. 7 kg EXTRA RINSE TIME SAVE Bawełniane + White and coloured Prewash... - Page 12 12 www.aeg.com Programme Type of load Cycle Functions Temperature max. weight of load description Wirowanie / All fabrics Drainage of the SPIN REDUCTION Odpompowa- The maximum load water NO SPIN of the laundry is rela- Spin phase at the ted to the type of maximum speed.
- Page 13 ENGLISH 2) The wash and spin phase of this programme is soft to prevent the creases of the laundry. The appliance adds some rinses. 3) Set the spin speed. Make sure that it agrees with the laundry. To select the DRAIN programme only, set the function NO SPIN.
-
Page 14: Before First Use
14 www.aeg.com BEFORE FIRST USE To activate the drain system, put 2 li- detergent dispenser. Set and start a tre of water in the main wash com- programme for cotton at the highest partment of the detergent dispenser. temperature without laundry. This re-... - Page 15 ENGLISH The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme.
-
Page 16: Setting And Starting A Programme
16 www.aeg.com To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap. -
Page 17: At The End Of The Programme
ENGLISH Open the appliance door. Before you press button start the appliance, you can cancel Close the appliance door and press or change the set of the delay button . The programme or the start. delay start continues. You cannot set the delay start with If the temperature and level of the the Steam programme. -
Page 18: Hints And Tips
18 www.aeg.com HINTS AND TIPS THE LAUNDRY LOAD DETERGENTS AND ADDITIVES • Divide the laundry in: white, coloured, • Only use detergents and additives spe- synthetics, delicates and wool. cially made for washing machines. • Obey the washing instructions that are •... - Page 19 ENGLISH Water hardness Level Type °dH °T.H. mmol/l Clarke medium 8-14 16-25 1.6-2.5 10-16 hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25...
-
Page 20: Care And Cleaning
20 www.aeg.com CARE AND CLEANING WARNING! the drum. Make regularly a maintenance wash. To do this: • Empty the laundry from the drum. Disconnect the appliance from the mains • Set the hottest cotton wash programme supply before you clean it. - Page 21 ENGLISH DETERGENT DISPENSER To clean the dispenser: Press the lever. Pull the dispenser out. Remove the top part of the liquid ad- ditive compartment. Clean all the parts with water. Clean the dispenser recess with a brush. Put back the dispenser in the recess. WARNING! DRAIN PUMP Disconnect the mains plug...
- Page 22 22 www.aeg.com To clean the drain pump: Open the drain pump door. Pull the flap out to remove it. Put a container below the recess of the drain pump to collect the water that flows out. Press the two levers and pull forward the drainage duct to let the water flow out.
- Page 23 ENGLISH Clean the filter under the water tap and put it back in the pump into the special guides. Make sure that you tighten correctly the filter to prevent leakages. Put the flap back and close the drain pump door. THE INLET HOSE FILTER AND •...
- Page 24 24 www.aeg.com Put 2 litres of water in the main wash compartment of the detergent dis- penser. Start the programme to drain the wa- ter. FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the...
-
Page 25: Troubleshooting
ENGLISH TROUBLESHOOTING The start of the appliance does not occur • - The appliance does not drain or it stops during operation. the water. First try to find a solution to the problem • - The appliance door is open or (refer to the table). - Page 26 26 www.aeg.com Problem Possible cause Possible solution The anti-flood de- • Disconnect the appliance. vice is on. • Close the water tap. • Contact the service centre. The spin phase The spin phase is off. Set the spin programme. does not operate.
- Page 27 ENGLISH Problem Possible cause Possible solution The appliance fills The end of the drain Make sure that the drain hose is with water and hose is too low. in the correct position. drain immediately. The washing re- The detergent you used Increase the detergent quantity sults are not satis- was not sufficient or cor-...
-
Page 28: Installation
28 www.aeg.com INSTALLATION UNPACKING Use the gloves. Remove the external film. If necessary, use a cutter. Remove the cardboard top. Remove the polystyrene packaging materials. Remove the internal film. Open the door. Remove the polystyr- ene piece from the door seal and all... - Page 29 ENGLISH Put one of the polystyrene packaging elements on the floor behind the ap- pliance. Carefully put down the appli- ance with the rear side on it. Make sure not to damage the hoses. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical posi- tion.
- Page 30 30 www.aeg.com Put the plastic caps in the holes. You can find these caps in the user man- ual bag. WARNING! We recommend that you keep the Remove all the packaging and the packaging and the transit bolts for transit bolts before you install the when you move the appliance.
- Page 31 ENGLISH THE INLET HOSE • Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position. • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings.
- Page 32 32 www.aeg.com With the plastic hose guide. • On the edge of a sink. • Make sure that the plastic guide cannot move when the appliance drains. At- tach the guide to the water tap or the wall. • To a stand pipe with vent-hole.
- Page 33 ENGLISH You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
- Page 34 34 www.aeg.com...
- Page 35 ENGLISH...
- Page 36 132930661-A-492011...