CDE Series
To select an input source:
1. Press INPUT/
2. Press ▼/▲ on the remote control to select the PC source.
3. Press OK/ENTER on the remote control.
4. Press EPG/BACK/
NOTE: The above image is for reference only and is subject to change without
notice.
IFPG1 Series
To select an input source:
1. Press INPUT/
2. In the OSD Menu, touch INPUT.
3. Touch the PC input source directly.
4. Touch a blank area outside of the menu to exit.
NOTE: The above image is for reference only and is subject to change without
notice.
VGA
Custom
on the remote control.
on the remote control to exit.
on the front panel.
12