Timer And Sleep Operation - Sharp XL-MP8H Operation Manual

Timer and sleep operation

XL-MP8H
ENGLISH
Timer playback:
The unit turns on and plays the desired source (disc or tuner) at a
preset time.
Sleep operation:
The radio or disc can be turned off automatically.
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 10).
2 Load a disc to be played.
You can use buttons on the remote control instead of the operation
lever.
Press the SHIFT button before pressing the TIMER or the MEM-
ORY button.
E-19
" Timer playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button to select the desired source
(disc or tuner).
Depending on the source, insert a disc or tune in to a station.
3
Adjust the volume using the volume control.
Do not turn the volume up too high.
4
Press the TIMER button. Within 8 seconds, press the MEM-
ORY/SET button.
5
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the hour to start, then press the
MEMORY/SET button.
6
Within 1 minute, move the operation lever toward PRESET
or PRESET to specify the minutes to start, then press
the MEMORY/SET button.
! The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
! " " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
05/4/18 XL-MP8H(H)E2.fm TINSZA056SJZZ