Care And Maintenance - Sharp KI-L80TA Operation Manual

CARE AND MAINTENANCE

CARE INDEX
1
2
4
6
Place
1 Water Tank
2
Main Body / Back Panel
3
Sensors
4
Humidifying Filter / Humidifying Tray
5
HEPA Filter / Deodorizing Filter
6
Plasmacluster Ion Generating Unit
7
Pre-Filter
8
Dust Box
FILTER
MAINTENANCE LAMP
When the cumulative operation period or the water
containing period is more than approximately 720
hours, the Filter Maintenance Lamp will turn on.
• The Lamp is off when there is no water filled.
• It will not calculate the time when the product is
unplugged.
• 30 days × 24 hours = 720 hours
This is a reminder to perform the maintenance
described Humidifying Filter and Tray, Main Body,
Back Panel, and Sensors.
After performing maintenance, reset the Filter
Maintenance Lamp.
RESET
♪
Touch for
3 sec.
7
8
3
2
5
Page
12
12
12
13
14
16
15
14
Always be sure to remove the
power plug from the wall outlet.
WATER TANK
Rinse the inside
with water.
NOTE How to clean hard to remove dirt.
Tank Cap Toothbrush
MAIN BODY / BACK
PANEL
Wipe with a dry,
soft cloth.
SENSORS
Remove the
dust gently
with a cleaning
tool such as a
vacuum cleaner.
NOTE How to clean hard to remove dirt.
Sensor Filter
1. Remove the Unit Cover.
2. Remove the Sensor Filter.
3. If the Sensor Filter is very dirty, wash it with water
and dry it thoroughly.
EN-12
Clean the inside of
the Water Tank with
a soft sponge and
the Tank Cap with
a cotton swab or
toothbrush.
Sensors