Various Screens And Operations; Source/Option Selection Screen - Kenwood DMX7522DABS Instruction Manual

Monitor with receiver

Hide thumbs

Table Of Contents

Table of Contents

In-Car Connections

<Wi-Fi Setup>

Shows the device name, device address and

password of this unit.

Go to step 2.

Set your driver's seat position of your car — [LEFT]

or [RIGHT] (Initial).

This setting changes the sidebar/button position

of Apple CarPlay/Android Auto screens accordingly

with the driver seat position.

• This setting is available only when iPhone with

Apple CarPlay and Android device with Android

Auto are not connected.

Select Android device usage for Apps — either

[Android Auto] (Initial) (page 16) or [Mirroring

for Android] (page 17).

• This setting is available only in Standby Mode

with no device connected via USB.

Reset Android Auto wireless connection when

you want to change the password for wireless

connection manually. The system of this unit is

rebooted after touching [Yes].

ENGLISH

Touch [Enter] to display the selected item

screen.

On the <Device Audio Control> screen:

Device Audio Control

Guidance/Voice Recognition Volume

Enter

Phone Incoming Volume

Enter

Phone Calling/Talking Volume

Enter

Speech Quality Adjust

Enter

Media Volume

• <Guidance/Voice Recognition Volume> can

be set separately for <Apple CarPlay> and

<Android Auto> within the range of 00 to 40

(Initial: 19).

• <Phone Incoming Volume>, <Phone Calling/

Talking Volume> can be set separately for

<Apple CarPlay> and <Android Auto/

Bluetooth> within the range of 00 to 40 (Initial:

15).

• <Speech Quality Adjust>:

<Microphone Level> can be set within the

range of –10 to +10 (Initial: –4).

<Echo Cancel Level>, <Noise Reduction

Level> can be set within the range of –5 to +5

(Initial: 0).

• <Media Volume> can be set within the range of

00 to 40 (Initial: 15).