Cleaning The Platen Roller/Roll Paper End Sensor; Cleaning The Peeler Unit - Epson TM-P60 User Manual

Cleaning the Platen Roller/Roll Paper End Sensor

When paper dust accumulates on the platen rollers or the roll paper end sensor,
follow the steps below to clean them. To maintain good functional capabilities,
clean them regularly (every 6 months).
1. Turn off the printer, open the peeler cover, and then the roll paper cover.
2. Clean the platen roller with a cotton swab lightly moistened with water or
alcohol.
3. Blow the paper dust accumulated around the roll paper end sensor with a
blower or a straw.
CAUTION:
Do not wipe the roll paper end sensor with water or alcohol. Its functional
capabilities may be affected.
4. Close the roll paper cover after the water or alcohol has dried.

Cleaning the Peeler Unit

After the peeler is used for a prolonged period of time, the glue from the labels
accumulates on the rollers of the peeler unit. If you leave the rollers in such a
condition, the glue may stick to issued labels, or a paper jam may occur. To
prevent malfunctions and maintain good print quality, clean the rollers regularly
(every 20,000 labels).
TM-P60 with Peeler User's Manual 13
English