Installation - Honeywell HW-T12303 User Manual

INSTALLATION

Note: Before you start to assemble your tree, please choose a location near an
electrical wall outlet. Place the tree stand on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Unfold the tree base to a 90 degree angle.
2. Carefully insert bottom section (C) of tree into tree base and tighten the screw (see Fig. 1).
3. Insert the middle section (B) of the tree into the bottom section (C) (see Fig. 2).
4. Insert the top section (A) into the middle section (B) (see Fig. 3).
Note: There is a tree top connector on the top section (A).
5. Allow the branches to fall into place or gently pull branches up and out. When
adjusting branches be sure that all wires are free of branch hinges (see Fig. 4).
6. Shape the branches. Starting with tips closest to the pole, shape one tip to the right,
one to the left and one along the centre of the main stem. Repeat pattern for each
branch (see Fig. 5).
7. Plug the well-connected power supply cord plug 1 from the bottom section (C) into
electrical outlet. The plug 2 is for tree top lights. Plug the power supply cord plug 2
into electrical outlet.
8. Another way to light up the tree. Please note this tree comes with a power cord with
on/off foot pedal switch (F) for easy illumination. Plug the plug 1 and plug 2 into the
power cord with on/off foot pedal switch (F). Plug the plug 3 into the electrical outlet.
. 9 Please note this tree comes with a control box for easy illumination and changing
functions. This tree is Color Changing, the 4 lighting options available are : 1) Warm
White Color Steady On, 2) Multicolor Steady On, 3) Color Changing and 4) Off.
Fig. 3
Fig. 2
Fig. 1
Tree top connector
A
B
C
Control Control
box box
D
Tree base
EN
Fig. 4
Plug 2
Fig. 5
Plug 1
F
On/off foot pedal On/off foot pedal
switch switch
Plug 3
4
side side
view view