Shooting With The Built-In Flash - Canon ICAM62B Advanced User's Manual

Shooting With the Built-in Flash

Using the built-in flash is recommended when the [ I ] icon appears on the
screen, when subjects in daytime shots are backlit, or when shooting under
low light.
Approximate Built-in Flash Range
ISO Speed
( = 145)
400
3200
* It may not be possible to obtain standard exposure when shooting distant subjects at
high ISO speeds, or under certain subject conditions.
286
1
Use the <I> lever to raise the
built-in flash.
2
Press the shutter button halfway.
Confirm that a [ I ] icon appears on the
z
screen.
3
Take the picture.
The built-in flash fires according to
z
[Flash firing] settings ( = 292).
To retract the built-in flash after shooting,
z
push it down with your fingers until it
clicks into place.
(Maximum approx. range in meters / feet)
EF-M15-45mm f/3.5-6.3 IS STM
Wide-angle End
f/3.5
2.6 / 8.6
7.4 / 24.4
Telephoto End
f/6.3
1.5 / 4.8
4.1 / 13.6