Related Manuals for IBEX TS106
Summary of Contents for IBEX TS106
- Page 1 USE AND MAINTENANCE MANUAL TS52 Hydraulic Offset Flail Mower TS (Funny Super)-e-08.doc Use and maintenance manual : TS...
-
Page 2: Preface
PREFACE This manual is an integral part of the machine. It must always accompany the machine and be kept within reach of the operator. The enclosures mentioned are on integral part of this manual. The purpose of this manual. This manual gives information for the correct and safe use of the machine. The owner must read this manual carefully before work with the machine. -
Page 3: Description
DESCRIPTION UNCTION OF USE The machine thanks to the hydraulic adjustment system can makes different functions like cut grass, cut up poles exc. The use of a technical constructive concept trended to the search of high performances, reduction of trebles and durability, improves the power/consumption ratio of the tractor thanks to the elasticity of the machine frame, to the tools shape, to the perfect rotor balancing and to many original technical solutions. -
Page 4: Technical Specifications
TECHNICAL SPECIFICATIONS HARATTERISTICS PER MODEL Working Tools Rotor Model Type Power Weight width Inch n° g/min 12-28 9-20 2410 12-28 9-20 2410 12-28 9-20 2410 65 cm 65 cm 65 cm 61 cm 74 cm 87 cm 126 cm 139 cm 152 cm 130 cm 130 cm... -
Page 5: Safety Informations
SAFETY INFORMATIONS RESCRIZIONI GENERALI Only work in daylight. To prevent damage due to lunch of objects or parts of blades, before to start job be sure that any persons or animals should be in the radius of 50 meters from the machine. Wear long pants and heavy shoes. -
Page 6: Safety Signs On The Machine
SAFETY SIGNS ON THE MACHINE In this section, the safety signs on the machine are reproduced and explained. 1. Read the operator manual. 2. Disconnect the tractor key before maintenance and repair operations. 3. Stay at safety distance from blades when machine is moving. 1. -
Page 7: Instructions For Use
INSTRUCTIONS FOR USE EFORE BEGINNING WORK ATTENTION : the machine must be used with a tractor equipped with 4 hydraulic couplings. a) Hook the machine to the tractor, operate as follows : 1. Remove the safety pins from the two lower connection points of the machine. 2. -
Page 8: To Beginning Work
O BEGINNING WORK a) Keep people and animals at least 65 feet radius all around the machine. b) Pull down the machine until the hoes touch the ground. c) Connect PTO power and gradually bring it to 540 r.p.m... d) Pull down completely the machine and start to work. T THE END OF CUTTING OPERATION a) Stop the tractor and wait at least 30 seconds that the rotor is completely stopped. -
Page 9: Maintenance Instructions
MAINTENANCE INSTRUCTIONS On diagram "A" the maintenances are indicated with their terms to effect on the machine. Not follow the scheduled terms can compromise the functionality of the machine and in this case the warranty is not applicable. DIAGRAM “A” SCHEDULED MAINTENANCE FIRST AFTER EACH... -
Page 10: Greasing
1. G REASING At the scheduled time on diagram "A", grease points "B" “C”, “D”,”E”, “F”, “G”. Greasing point is equipped with greaser HYDRAULIC TYPE MODEL "A" UNI 7663. To greasing use only MULTIFUNCTIONAL GREASE LITHIUM BASED Type NLGI 2. IL CHECK - OIL REPLACEMENT IN GEAR BOX At the scheduled time on diagram "A", check or replace oil into gear box. -
Page 11: Tools Replacement
OOLS REPLACEMENT a) To change tools, operate as follow : 1. Unscrew the nut then take out the screw “B”. 2. Take out tools “A” with bushes. 3. Assemble the new tool. 4. Fit the screw “B” then screw the nut. 5. -
Page 12: Problems Solving
PROBLEMS SOLVING TROUBLES GROUNDS AND SOLUTIONS -Not balanced rotor – Enquire a dealer. Abnormal vibrations -Loss of one or more tools – Replace. -Damaged bearings – Replace. -Damaged tools – Replace. Uneven or unsatisfactory cut -Tools choice not good – Change with another type. -
Page 13: Transport
TRANSPORT Except when working, moving the machine takes place when the machine is standing still and the transmission is disconnected. <Important>: keep speed low avoiding holes and ground roughness. <Important>: Before begin the movements always make sure that the safety hooks be in position. <Note when on the road, obey existing traffic laws. -
Page 14: Work And Maintenance Sheet
WORK AND MAINTENANCE SHEET Every user should register on this sheet the facts about the life of the machine (both work and maintenance), so as to attest its conditions. DATE HOURS MAINTENANCE NOTE OPERATOR... - Page 15 SPARE PARTS & OPTIONS...
-
Page 16: Sheets
SHEETS... -
Page 17: Mechanism
MECHANISM... -
Page 18: Linkage
LINKAGE... -
Page 19: Hydraulic Plant
HYDRAULIC PLANT... -
Page 20: Table Of Contents
INDEX PREFACE ................................2 DESCRIPTION ..............................3 FUNCTION OF USE ............................3 PERFORMANCES ............................3 PERFORMANCES LIMIT ..........................3 STANDARD EQUIPMENTS ........................... 3 TECHNICAL SPECIFICATIONS ........................4 SAFETY INFORMATIONS ..........................5 PRESCRIZIONI GENERALI .......................... 5 SAFETY RESTRICTIONS..........................5 ..............................5 UNNING IN SAFETY SIGNS ON THE MACHINE ........................