Related Manuals for Beko CM 9120
Summary of Contents for Beko CM 9120
- Page 1 Washing Machine User Manual CM 9120 Document Number: 2820529349_EN/ 02-02-22.(15:57)
-
Page 2: General Safety Instructions
1 General safety instructions • Do not force open the locked loading door. Door can be This section includes security opened a few minutes after the instructions which may help prevent washing cycle ends. In case the injuries and material damage risks. of forcing the loading door to All kinds of warranties shall be invalid if open, the door and the lock... -
Page 3: Children's Safety
1.3 Children’s safety CAUTION! • Do not forget to close the CAUTION! loading door when leaving the • This product can be used by room where the product is the children who are at the located. age of 8 and over and the •... -
Page 4: Important Instructions For Environment
This product has been manufactured with high DANGER! quality parts and materials which can be reused and are suitable for recycling. Do not dispose • Do not wash the product by of the waste product with normal domestic spraying or pouring water onto and other wastes at the end of its service life. -
Page 5: Technical Specifications
4 Technical specifications Supplier name or trademark Beko CM 9120 Model name 7148248000 Rated capacity (kg) Maximum spin speed (rpm) 1200 Built-in Height (cm) Width (cm) Depth (cm) Single Water inlet / Double Water inlet • / - • Available... -
Page 6: Appropriate Installation Location
4.1 Installation • Leaving a gap at the sides of the machine is suggested to reduce vibration and noise INFORMATION • On a graduated floor, do not place the product next to the edge or on a platform. • Your washing machine automatically •... -
Page 7: Connecting Water Supply
4.1.4 Connecting water supply INFORMATION • It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher. CAUTION! •... -
Page 8: Adjusting The Feet
4.1.6 Adjusting the feet 4.1.8 Initial use Before starting to CAUTION! use the product • In order to ensure that the product make sure that operates more silently and vibration- the preparations free, it must stand level and balanced are made which on its feet. - Page 9 4.2 Preparation • Operate the product in the highest load capacity allowed for the programme you 4.2.1 Sorting the laundry have selected, but do not overload. See, • Sort laundry according to type of fabric, “Programme and consumption table”. color, and degree of soiling and allowable •...
- Page 10 The detergent drawer CAUTION! is composed of three • Use only detergents manufactured compartments: specifically for washing machines. • Do not use soap powder. – (1) for prewash – (2) for main wash Adjusting detergent amount – (3) for softener The amount of washing detergent to be used –...
- Page 11 Using starch • If required, clean the apparatus with water when it is in place or by removing it. • Put the liquid soda, powder soda or the • If you will use powder detergent, the fabric dye into the softener compartment. apparatus must be secured at top position.
-
Page 12: Tips For Efficient Washing
4.2.7 Tips for efficient washing Clothes Light Colours and Black/Dark Delicates/ Colours Whites Colours Woolens/Silks (Recommended (Recommended (Recommended temperature (Recommended temperature temperature range temperature range range based on soiling level: range based on soiling level: based on soiling based on soiling 40-90 oC) cold-40 oC) level: cold -40 oC) -
Page 13: Operating The Product
4.3 Operating the product 1 - Programme Selection Knob (Uppermost position On / Off) 4.3.1 Control panel 2 - Display 3 - End Time Adjustment Button 4 - Programme Follow-up Indicator 5 - Start/Pause Button 6 - Auxiliary Function Button 3 7 - Auxiliary Function Button 2 8 - Auxiliary Function Button 1 9 - Spin Speed Adjustment Button... - Page 14 • : Selectable * : Automatically selected, cannot be cancelled. ***: Eco 40-60 with 40 °C temperature selection is the test programme in accordance with EN 60456:2016/A11:2020 and energy label with Commission Delegated Regulation (EU) 2019/2014 - : See the programme description for maximum load. INFORMATION •...
-
Page 15: Main Programmes
4.3.5 Main programmes Bebek+ ( Hygiene+) • Depending on the type of fabric, use the Applying a steam step at the beginning of the following main programmes. programme allows to soften the dirt easily. • Pamuklu (Cottons) Use this programme for your laundry (baby clothes, bed sheets, bedlinen, underwear, etc. - Page 16 Mix 40) • Karma ( CAUTION! You can use this programme to wash cottons and synthetics together without the need to sort them. • Do not use the washing machine to wash materials such as carpets, rugs etc. Otherwise, permanent •...
- Page 17 4.3.7 Special programmes Rinse hold If you are not going to unload your clothes For specific applications, select any of the immediately after the programme ends, you can use following programmes. rinse hold function to keep your laundry in the final •...
- Page 18 4.3.10.1 Auxiliary functions INFORMATION Ön Yıkama (Prewash) • • This is not a washing programme. A Prewash is only worthwhile for heavily soiled It is a maintenance programme. laundry. Not using the Prewash will save • Do not run this programme when there are energy, water, detergent and time.
- Page 19 Changing the delayed end time • AntiCrease+ If you want to change the time during countdown: If you press and hold the auxiliary function button Turn the programme selection knob to cancel the 3 for 3 seconds, this function will be selected delayed end time function, and then set the desired and the programme follow-up light of the relevant time again.
-
Page 20: Loading Door Lock
You can change the auxiliary functions, speed and temperature settings without stopping the programme flow while the programme is running. To do this, the change you are going to make must be something that will be carried out after the programme step that is running. If the change is not suitable, relevant lights will flash 3 times. -
Page 21: Cancelling The Programme
Changing the auxiliary function, speed and 4.3.17 End of programme temperature At the end of the programme, “End” will be displayed. Depending on the step the programme has reached, you can cancel or select auxiliary 1. Wait until the light of the loading door goes functions. -
Page 22: Maintenance And Cleaning
4.4 Maintenance and cleaning INFORMATION Service life of product extends and frequently • Foreign metal substances will cause experienced problems will be reduced if it is rust stains in the drum. Clean the cleaned at regular intervals. stains on the drum surface by using 4.4.1 Cleaning the detergent drawer cleaning agents for stainless steel. -
Page 23: Draining Remaining Water And Cleaning The Pump Filter
4.4.5 Draining remaining water 3 Follow the below procedures in order to drain water. and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric The product does not have an emergency fibres clogging the pump impeller during water drain hose, in order to drain the water: discharge of washing water. -
Page 24: Troubleshooting
5 Troubleshooting Machine directly discharges the water it takes in. • Draining hose might not be at adequate height. >>>Connect the water draining hose as described in the Program does not start after closing the door. operation manual. • Start / Pause / Cancel button was not pressed. >>>*Press No water can be seen in the machine during the Start / Pause / Cancel button. - Page 25 Programme time does not countdown. (*) Washing performance is poor: Clothes smell unpleasantly. (**) • There might be unbalanced load in the machine. >>>Automatic unbalanced load detection system might • Odours and bacteria layers are formed on the drum as a be activated due to the unbalanced distribution of the result of continuous washing at lower temperatures and/ laundry in the drum.
- Page 26 Detergent residue in the detergent drawer. (**) Laundry remains wet at the end of the programme. • Detergent is put in wet drawer. >>>Dry the detergent drawer before putting in detergent. • Excessive foam might have occurred and automatic foam •...
- Page 27 Moreover, to ensure product safety and to prevent risk of serious injury, the mentioned self-repair shall be done following the instructions in the user manual for self-repair or which are available in support.beko.com. For your safety, unplug the product before attempting any self-repair.